欢迎登录材料期刊网

材料期刊网

高级检索

采用深冷轧制技术对AISI 310S奥氏体不锈钢进行不同变形量的实验,借助OM、SEM、TEM、XRD及微拉伸试验等方法研究了不同变形量下奥氏体不锈钢的组织特性及性能变化规律.结果表明:奥氏体不锈钢在深冷轧制不同变形量下均未发生应变诱发马氏体相变,在变形量为30%时,组织内部出现高密度位错且夹杂少量的形变孪晶,随着变形量增大至70%时,组织内部出现大量形变孪晶,孪晶与位错的交互作用显著加剧;到变形量为90%时,晶粒完全碎化至纳米量级.而且随着变形量的增大,强度指标大幅度上升,屈服强度、抗拉强度分别从原始态的305 MPa、645 MPa增加至1099 MPa、1560 MPa;而伸长率则从40.8%(原始)下降至6.4%(变形量90%),拉伸断口由韧性断裂向准解理断裂转变.

参考文献

[1] Hedayati A,Najafizadeh A,Kermanpur A,el al .The effect of cold rolling regime on microstructure and mechanical properties of AISI 304L stainless steel[J].Journal of Materials Processing Technology,2010,210(8):1017-1022.,2010.
[2] 杨钒,黄建龙.304奥氏体不锈钢应变诱发马氏体的研究[J].材料热处理学报,2012(03):104-109.
[3] Kain V,Chandra K,Adhe K N,el al .Effect of coldwork on low-temperature sensitization behaviour of austenitic stainless steels[J].Journal of Nuclear Materials,2004,334(2):115-132.,2004.
[4] 王明家,马千,李景丽,张勇,王艳,陈雷.热老化对核级316LN锻造控氮奥氏体不锈钢微观组织及性能的影响[J].燕山大学学报,2013(05):385-388,401.
[5] 周翠兰,刘红梅,白晋钢,聂志水,周禾丰,乔珺威.冷轧变形量对304不锈钢力学性能的影响[J].钢铁,2012(10):70-75.
[6] Huang J X,Ye X N,Xu Z .Effect of cold roiling on microstructure and mechanical properties of AISI 301LN metastable austenitic stainless steels[J].Journal of Iron and Steel Research,2012,19(10):59-63.,2012.
[7] 熊毅,贺甜甜,郭志强,陈正阁,张凌峰,任凤章.不同温度重度变形及退火对工业纯铝组织的影响[J].材料热处理学报,2011(09):63-66.
[8] Lee Y B,Shin D H,Park K T,et al .Effect of annealing temperature on microstructures and mechanical properties of a 5083Al alloy deformed at cryogenic temperature[J].Scripta Materialia,2004,51
[9] Rangaraju N,Raghuram T,Vamsi Krishna B,et al .Effect of cryorolling and annealing on microstructure and properties of commercially pure aluminium[J].Materials Science and Engineering A,2005,398
[10] Lee T R,Chang C P,Kao P W .The tensile behavior and deformation microstructure of cryorolled and annealed pure nickel[J].Material Science and Engineering A,2005,408
[11] Nagarjuna S,Babu C U,Ghosal P .Effect of cryorolling on age hardening of Cu-1.5Ti alloy[J].Material Science and Engineering A,2008,491
[12] Panigrahi S K,Jayaganthan R .A study on the mechanical properties of cryorolled Al-Mg-Si alloy[J].Materials Science and Engineering A,2008,480
[13] Das P,Jayaganthan R,Singh I V .Tensile and impact-toughness behaviour of cryorolled Al 7075 alloy[J].Materials and Design,2011,32(3):1298-1305.,2011.
[14] 张熹,王春旭,刘宪民,史庆南.18-18-0.5N高氮奥氏体不锈钢冷轧变形过程中的组织演变和形变强化[J].北京科技大学学报,2008(08):875-879.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%