欢迎登录材料期刊网

材料期刊网

高级检索

研究分析了不同保温温度、冷却水温等条件对铝合金等轴晶形核率、柱状晶形核率、柱状晶向等轴晶转变(CET)位置的影响规律.试验结果表明:降低保温温度、升高冷却水温,会增大等轴晶区的面积;降低冷却水温、降低保温温度会增大铸件柱状晶和等轴晶的形核率.还根据获得的CET位置实验结果,讨论了国内外文献提出的CET位置判据对本研究的适用性,并针对本文的实验条件,提出了具有更高预测精度的CET转变判据.

参考文献

[1] 胡汉起;沈宁福;姚山.金属凝固原理[M].北京:机械工业出版社,1991
[2] Jackson K A;Hunt J D;Uhlmam D R .On the origin of equiaxed zone in castings[J].Transactions TMS-AIME,1996,236(02):149-158.
[3] Fredriksson H Hillert .On the formation of the central equiaxed zone in ingots[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1972,3(02):569-574.
[4] Mahapatra R B;Weinberg F .The columnar to equiaxed transition in tin-lead alloys[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1987,18(02):425-432.
[5] Fay Hua;R. N. Grugel .Direct observation of the columnar to equiaxed zone transition in an undercooled melt[J].Scripta materialia,1996(4):573-577.
[6] G. Heiberg;K. Nogita;A.K. Dahle .Columnar to equiaxed transition of eutectic in hypoeutectic aluminium-silicon alloys[J].Acta materialia,2002(10):2537-2546.
[7] CLAUDIO A. SIQUEIRA;NOE CHEUNG;AMAURI GARCIA .Solidification Thermal Parameters Affecting the Columnar-to-Equiaxed Transition[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2002(7):2107-2118.
[8] Mangelinck-Noel N;Nguyen-Thi H;Reinhart G;Schenk T;Cristiglio V;Dupouy MD;Gastaldi J;Billia B;Hartwig J .In situ analysis of equiaxed growth of aluminium-nickel alloys by x-ray radiography at ESRF[J].Journal of Physics, D. Applied Physics: A Europhysics Journal,2005(10A):A28-A32.
[9] 姚山,杨杰,戴利欣,宫雪娜,郑贤淑,金俊泽,阿布里提·阿布都拉.铝合金连续铸造过程CET位置判据的研究[J].铸造技术,2005(04):303-305,308.
[10] Hunt J D .Steady state columnar and equiaxed growth of dendrites and eutectic[J].Materials Science and Engineering,1984,65(01):75-83.
[11] Kurz W;Bezencon C;Gaumann M .Columnar to equiaxed transition in solidification processing[J].Science and Technology of Advanced Materials,2001,2(01):185-191.
[12] Ch.-A.Gandin .Experimental Study of the Transition from Constrained to Unconstrained Growth during Directional Solidification[J].ISIJ International,2000(10):971-979.
[13] Ares A.E.;Schvezov C.E. .Solidification Parameters during the Columnar-to-Equiaxed Transition in Lead-Tin Alloys[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2000(6):1611-1625.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%