通过物理模拟系统上的轧制实验,研究了基于动态相变的热轧细晶C-Mn-Si和C-Mn-A1-Si系多相钢的组织及性能特点.结果表明,通过动态相变和相变后冷却的控制,可以得到铁素体晶粒尺寸较为细小,珠光体团径较小,片层间距较薄,以及一定体积分数的贝氏体和残留奥氏体所组成的多相组织.与铁素体粒径相类似的细晶钢相比,由于组织的细晶化,多相化,以及残留奥氏体塑性变形时所产生的TRIP效应,使实验钢具有强度较高、塑性较好,屈强比较低,加工硬化能力较高的特点.
参考文献
[1] | Y.Iwahashi;Z.Horita;M.Nemoto .An investigation of microstructural evolution during equal-channel angular pressing[J].Acta materialia,1997(11):4733-4741. |
[2] | D.H.Shin;B.C.Kim .Microstructural Evolution in a Commercial Low Carbon Steel by Equal Channel Angular Pressing[J].Acta materialia,2000(9):2247-2255. |
[3] | N.Tsuji;Y.Saito;H.Utsunomiya;S.Tanigawa .ULTRA-FINE GRAINED BULK STEEL PRODUCED BY ACCUMULATIVE ROLL-BONDING(ARB)PROCESS[J].Scripta materialia,1999(7):795-800. |
[4] | Valiev R Z;Mukherjee A K .Nanostructrue and unique properties in intermetallics subjected to severe plastic deformation[J].Scripta Materialia,2001,41(8-9):1747-1750. |
[5] | P.D.Hodgson;M.R.Hickson;R.K.Gibbs .ULTRAFINE FERRITE IN LOW CARBON STEEL[J].Scripta materialia,1999(10):1179-1184. |
[6] | M.R. HICKSON;P.J. HURLEY;R.K. GIBBS .The Production of Ultrafine Ferrite in Low-Carbon Steel by Strain-Induced Transformation[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2002(4):1019-1026. |
[7] | R. Song;D. Ponge;D. Raabe .Improvement of the Work Hardening Rate of Ultrafine Grained Steels Through Second Phase Particles[J].Scripta materialia,2005(11):1075-1080. |
[8] | Ma E .Instabilities and ductility of nanocrystalline and ultrafine-grained metals[J].Scripta Materialia,2003,49(07):663-668. |
[9] | 杨王玥,齐俊杰,孙祖庆,杨平.低碳钢形变强化相变的特征[J].金属学报,2004(02):135-140. |
[10] | 齐俊杰,杨王玥,孙祖庆,章晓中,董志锋.低碳钢SS400形变强化相变组织演变的动力学[J].金属学报,2005(06):605-610. |
[11] | 徐海卫,杨王玥,孙祖庆.基于动态相变的细晶双相低碳钢组织控制[J].金属学报,2006(10):1101-1108. |
[12] | 尹云洋,杨王玥,李龙飞,孙祖庆,王西涛.基于动态相变的热轧C-Mn-Al-Si系TRIP钢组织演变[J].金属学报,2008(06):686-692. |
[13] | 尹云洋,杨王玥,李龙飞,孙祖庆,王西涛.基于动态相变的热轧TRIP钢组织及性能研究[J].金属学报,2008(11):1299-1304. |
[14] | de Meyer M;Mahieu J;de Cooman B C .Empirical microstructure prediction method for combined intercritical annealing and baintic transformation of TRIP steel[J].Materials Science and Technology,2002,18(10):1292-1304. |
[15] | Guo H;Enomoto M .Effect of substitutional solute accumulation at γ/α boundaries on the growth of ferrite in low carbon steels[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2007,38(06):1153-1161. |
[16] | Tsukatani I;Hashimoto S I;Inoue T .Effects of silicon and manganese addition on mechanical properties of high-strength hot-rolled sheet steel containing retaining retained austenite[J].ISIJ International,1991,31(09):992-1000. |
[17] | Timokhina I B;Hodgson P D;Pereloma E V .Effect of alloying elements on the microstructure-property relationship in thermomechanically processed C-Mn-Si TRIP steel[J].Steel Research International,2002,73(6-7):274-279. |
[18] | Girault E;Mertens A;Jacques P et al.Comparison of the effects of silicon and aluminium on the tensile behaviour of multiphase TRIP-assisted steels[J].Scripta Materialia,2001,44(06):885-892. |
[19] | Koh-ichi SUGIMOTO .Effects of Retained Austenite Parameters on Warm Stretch-flangeability in TRIP-aided Dual-phase Sheet Steels[J].ISIJ International,1999(1):56-63. |
[20] | M. De MEYER .The Influence of the Substitution of Si by Al on the Properties ofCold Rolled C-Mn-Si TRIP Steels[J].ISIJ International,1999(8):813-822. |
[21] | Sun ZQ.;Yang WY.;Qi JJ.;Hu AM. .Deformation enhanced transformation and dynamic recrystallization of ferrite in a low carbon steel during multipass hot deformation[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):201-206. |
[22] | I. B. TIMOKHINA;P. D. HODGSON;E. V. PERELOMA .Effect of Deformation Schedule on the Microstructure and Mechanical Properties of a Thermomechanically Processed C-Mn-Si Transformation-Induced Plasticity Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2003(8):1599-1609. |
[23] | Jacques PJ .Transformation-induced plasticity for high strength formable steels[J].Current opinion in solid state & materials science,2004(3/4):259-265. |
[24] | Choo W Y;Um K K;Lee J S.Proc Int Symp on ‘Ultrafine grained steels[A].Fukuoka,Japan,2001:18-25. |
[25] | Hayashi T;Torizuka S;Mitsui T et al.Creation of equiaxed fine ferrite grain structures by warm deformation of martensite[J].Current Advances in Materials and Processes,1998,11(06):1031. |
[26] | Y. Tomota;H. Tokuda;Y. Adachi .Tensile behavior of TRIP-aided multi-phase steels studied by in situd neutron diffraction[J].Acta materialia,2004(20):5737-5745. |
[27] | Yo TOMOTA;Akinori NARUI;Noriyuki TSUCHIDA .Tensile Behavior of Fine-grained Steels[J].ISIJ International,2008(8):1107-1113. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%