基于无限大平板模型的非稳态热传导理论,推导了适用于中密度纤维板试件在空气介质加热条件下的温度场和达到目标温度加热时间的解析方程,采用ANSYS有限元软件对加热过程进行了有限元建模和模拟分析。验证试验分别测试研究了介质温度、试件厚度和幅面尺寸对温升行为的影响,并与解析法和有限元模拟法获得的结果进行了比较。结果表明,理论解析法和有限元模拟得到的温升曲线与实测温升曲线吻合,试件达到目标温度时间与实测值相比最大误差为2.0%,验证了解析解和有限元模型的有效性。
An analytical solution based on infinite flat plate theory of transient heat transfer for medium density fiberboard（MDF） heating in hot air was established.The temperature fields and equations to estimate heating time were derived.FEM modeling and simulations were conducted using ANSYS software.A series of field tests,in which the effects of different environment temperatures,thicknesses and sizes of the samples,and positions on temperature responses were considered,were carried out to verify the results obtained by the analytical and FEM simulation.The results show that the temperature responses by the analytical solution and FEM simulation agreed well with the actually measured results.The elapsed time to reach the equilibrium temperature obtained by the analytical and FEM methods is close to that measured by the field tests.
参考文献
| [1] | Forest Products Laboratory(U.S.) .Wood Handbook.General Technical Report FPL-GTR-190[E].Madison,Wl:U.S.Department of Agriculture,Forest Service,Forest Products Laboratory,2010. |
| [2] | Suleiman B M;Larfeldt J;Leckner B et al.Thermal conductivity and diffusivity of wood[J].Wood Science and Technology,1999,33:465-473. |
| [3] | 高瑞堂;隋振璋 .木材的热力学函数[J].东北林业大学学报,1994,22(02):68-75. |
| [4] | YANG Qing-xian,ZHANG Chun-ying.Brief report on theoretical research upon wood thermal property[J].林业研究(英文版),2000(02):145. |
| [5] | MacLean J D.Studies of heat conduction in wood.Part I Results of steaming green round Sothern Pine timbers[A].,1930:197-217. |
| [6] | MacLean J D.Studies of heat conduction in wood.Part I1.Results of steaming green round Sothern Pine timbers[A].,1932:303-327. |
| [7] | Simpson W T .Heating times for round and rectangular cross sections of wood in steam .General Technical Report FPL-GTR-130[R].Madison,WI:U.S.Department of Agriculture,Forest Service,Forest Products Laboratory,2001. |
| [8] | Perry N P;Audimar P B .Finite element model for the heating of frozen wood[J].Wood Fiber Sei,2006,38)2:359-364. |
| [9] | Liping Cai;Peter Garrahan .An Estimation Of Thawing Time For Hemlock Dimension Lumber[J].Wood science and technology,2008(8):611-620. |
| [10] | 王逢瑚,李鹏,陶毓博.木材单板热压导热数学模型和可视化数值解的研究[J].材料热处理学报,2005(01):90-92. |
| [11] | 余养伦,于文吉,江泽慧,王天佑.单板层积材热压升温曲线数值模拟的研究[J].材料热处理学报,2007(01):130-133. |
| [12] | 杨世铭;陶文铨.传热学[M].北京:高等教育出版社,2006 |
| [13] | Antonio Campo .Rapid determination of spatio-temporal temperatures and heat transfer in simple bodies cooled by convection usage of calculators in lieu of heisler-grSber charts[J].International Journal of Heat and Mass Transfer,1997,24(04):553-564. |
| [14] | ASTM D1037 -06a.Standard test methods for evaluating properties of wood-based fiber and particle panel materials[S].PA,USA:ASTM International,2006. |
| [15] | Abdar N.K.halifa .Natural convective heat transfer coefficient - a review I.Isolated vertical and horizontal surfaces[J].Energy Conversion & Management,2001(4):491-504. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%