为从理论上研究预拉力对角型材拉弯回弹的影响,采用指数强化材料模型,在分析角型材截面应力应变分布的基础上,建立了型材转台式拉弯解析模型.分析讨论了预拉力对角型材截面应力分布和加载弯矩的影响规律,并计算得到了回弹角随预拉力变化的规律曲线.与采用双线性强化材料模型的解析计算结果比较表明:采用指数强化材料模型计算的回弹结果与实验数据更吻合.
参考文献
| [1] | Arild H. Clausen;Odd S. Hopperstad;Magnus Langseth .Sensitivity of model parameters in stretch bending of aluminum extrusions[J].International Journal of Mechanical Sciences,2001(2):427-453. |
| [2] | J. E. Miller;S. Kyriakides .Three-dimensional effects of the bend-stretch forming of aluminum tubes[J].International Journal of Mechanical Sciences,2003(1):115-140. |
| [3] | 李小强,周贤宾,金朝海,郝长岭.型材拉弯数值模拟夹钳边界条件的一种等效模型[J].塑性工程学报,2009(01):64-69. |
| [4] | 刁可山,周贤宾,李晓星,金朝海.矩形截面型材拉弯成形[J].北京航空航天大学学报,2005(02):134-137. |
| [5] | Frode Paulsen;Torgeir Welo .A design method for prediction of dimensions of rectangular hollow sections formed in stretch bending[J].Journal of Materials Processing Technology,2002(1/3):48-66. |
| [6] | Edmundo Corona .A simple analysis for bend-stretch forming of aluminum extrusions[J].International Journal of Mechanical Sciences,2004(3):433-448. |
| [7] | Hong Zhu;Kim A. Stelson .Modeling and Closed-Loop Control of Stretch Bending of Aluminum Rectangular Tubes[J].Journal of manufacturing science and engineering,2003(1):113-119. |
| [8] | A.A. Elsharkawy;A.A. El-Domiaty .Determination of stretch-bendability limits and springback for T-section beams[J].Journal of Materials Processing Technology,2001(3):265-276. |
| [9] | 钱志平,周超,赵军,高才良,吕玫.塑料包覆铝型材拉弯回弹研究[J].塑性工程学报,2008(03):77-80. |
| [10] | 张冬娟,崔振山,李玉强,阮雪榆.平面应变板料拉弯成形回弹理论分析[J].工程力学,2007(07):66-71. |
| [11] | 吴建军,张贺刚,王俊彪,王永军.型材拉弯的力学与回弹分析[J].材料科学与工艺,2004(04):357-359. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%