利用微弧氧化方法在6061铝合金上制备陶瓷膜.采用扫描电镜和X射线衍射仪研究了氧化膜的截面组织、成分和相结构,并用划痕法和热震试验评价了膜层与铝基体结合状况.结果表明微弧氧化膜由致密层和疏松层组成,氧化膜主要相组成为γ-Al2O3、α-Al2O3和SiO2非晶相.划痕压力为55N时50μm膜层开始被破坏.热震试验结果表明,50μm膜层样品经过500℃→水淬50次循环后无变化.膜层越薄,抗热震性能越好,膜层表面抛光有利于提高微弧氧化膜的热震性能.
参考文献
[1] | Garcia-Vergara S.;Skeldon P.;Thompson GE.;Bailey P.;Noakes TCQ. Habazaki H.;Shimizu K. .Morphology of enriched alloy layers in an anodized Al-Cu alloy[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2003(1/4):121-127. |
[2] | Zuo Y;Zhao P H .Corrosion behavior of anodized aluminum sealed by different methods[J].Surface and Coatings Technology,2003,166:237-240. |
[3] | X. Nie;A. Leyland;H. W. Song;A. L. Yerokhin;S. J. Dowey;A. Matthews .Thickness effects on the mechanical properties of micro-arc discharge oxide coatings on aluminium alloys[J].Surface & Coatings Technology,1999(0):1055-1060. |
[4] | Xue W;Du J;Wu X et al.Tribologieal behavior of mieroarc oxidation coatings on aluminum alloy[J].ISIJ International,2006,46:287-291. |
[5] | 赵启翮,蔡珣,陈秋龙,翁海峰.6063铝合金微弧氧化膜性能研究[J].腐蚀与防护,2005(04):157-159. |
[6] | Khan RHU;Yerokhin AL;Pilkington T;Leyland A;Matthews A .Residual stresses in plasma electrolytic oxidation coatings on A1 alloy produced by pulsed unipolar current[J].Surface & Coatings Technology,2005(5/6):1580-1586. |
[7] | Curran JA;Clyne TW .Thermo-physical properties of plasma electrolytic oxide coatings on aluminium[J].Surface & Coatings Technology,2005(2/3):168-176. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%