设计了聚甲基丙烯酰亚胺（PMI）泡沫、交联聚氯乙烯（X-PVC）泡沫、NOMEX蜂窝、缝合PMI以及开槽PMI泡沫等形式的玻璃布面板夹层结构复合材料,研究了芯材种类和厚度、面板玻璃布层数以及缝合和开槽等因素对夹层结构低速冲击性能的影响。结果表明,PMI泡沫芯较X-PVC泡沫芯和NOMEX蜂窝芯具有更高的冲击破坏载荷和吸收能量。随着泡沫密度及面板厚度的增加,夹层结构复合材料的冲击破坏载荷和破坏吸收能量增大。合理的缝合和开槽,能够增加PMI泡沫夹层结构的强度、刚度及界面性能,提高冲击承载能力。
The low-velocity impact tests on sandwich structures composed of glass cloth facesheet and different cores which are PMI foams,X-PVC foams,NOMEX honeycomb,stitched PMI foams and grooved PMI foams.The Influential factors,which include different kinds,different thickness of cores and facesheets and interfacial reinforcement techniques on stitching and grooving were studied.The test results show that PMI foam core has higher impact load and energy absorption than X-PVC foam core and NOMEX honeycomb.The impact damage load and energy of sandwich improve with the increase of thickness of facesheets and density of cores.Reasonable stitching and grooving can enhance the strength and rigidity of the sandwich structure,interface property and the resistance of impact.
参考文献
| [1] | Schubel Patrick M, Luo Jyi- Jiin, Daniel Isaac M. Low velocity impact behavior of composite sandwich panels [J]. Composites Part A, 2005, 36(10): 1389-1396. |
| [2] | Hazizan M A, Cantwell W J. The low velocity impact response of an aluminum honeycomb sandwich structure [J]. Composites Part ]3, 2003, 34(8): 679-687. |
| [3] | Reyes V G, Cantwell W J. The high velocity impact response of composite and FML-reinforced sandwich structures [J]. Composites Science and Technology, 2004, 64(1): 35-54. |
| [4] | 江大志,郭洋,李长亮.双层夹芯复合材料结构横向冲击响应实验[J].爆炸与冲击,2009,29(6):590-595. |
| [5] | Abrate S. Localized impact on sandwich structures with laminated facings [J]. Appl Mech Rev, 1997, 50(2) : 69-82. |
| [6] | Lee G W, Choi J S, Lee S S, et al. Mechanical properties and failure mechanism of the polymer composite with 3 - dimensionally stitched woven fabric [J]. Macromol, 2003,11 (2) : 98-103. |
| [7] | Lascoup B, Aboura Z, Khellil K, et al. Impact response of three-dimensional stitched sandwich composite [J]. Composite Structures, 2010, 92(2): 347-353. |
| [8] | 姚秀冬,周叮,刘伟庆.芯层开槽对复合夹层板力学性能的影响分析[J].玻璃钢/复合材料,2010(3):25-28 |
| [9] | Palmer Raymond J. Stitch-reinforced sandwich panel and method of making same: US, US 6187411 B1 [P], 2001-02- 13 |
| [10] | 万里,刘伟庆,周叮,等.齿槽增强泡桐木夹层结构界面性能试验[J].南京工业大学学报:自然科学版,2010,32(5):1-5. |
| [11] | 刘铁民,张广成,梁国正,等.高性能MAA/AN/AM共聚物泡沫制备过程中的"原位成环"反应研究[J].材料工程,2007(6):20-25 |
| [12] | Danielsson Mikael, Grenestedt Joachim L. Gradient foam core materials for sandwich structure: Preparation and characterization [J]. Composites Part A, 1998, 29(8): 981-988. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%