The effects of Mo on the microstructure and mechanical properties of Ti(C,N)-based cermets with low Ni have been studied systematically. Different contents of Mo (4-12 wt.%) were added into Ti(C,N)-based cermets. Specimens were fabricated by conventional powder metallurgy and vacuum sintered at temperatures of 1440, 1450, and 1460℃ individually.The microstructure and fracture morphology were investigated by scanning electron microscope, and the mechanical properties such as transverse strength and hardness were measured. The results show that the microstructure is uniform and the thickness of rim phase is moderate when the content of Mo is 8 wt.%; the mechanical properties of the specimens sintered at 1450℃ are better than those sintered at 1440 and 1460℃. The integrated properties of transverse strength and hardness are the best when the content of Mo is 8 wt.% and the sintering temperature is 1450℃.
参考文献
| [1] | Kieffer R;Ettmayer P;Hausen H H.Modern Development in P/M,Vol 5[M].New York:Plenum Press,1971:201. |
| [2] | Fahrmann M .High temperature creep of Ti(C,N)-based cermets[J].RM & HM,1989,12:219. |
| [3] | Xiong W H;Hu Z H;Cui Q .The transition layer of interphase in Ti(C,N)-based cermets[J].Acta Metall Sin(in Chinese),1996,32(10):1075. |
| [4] | Kieffer R;Ettmayer P;Lengauer W .Ti-Mo-C-N system:Stability of the (Ti,Mo)(C,N)1-xphase[J].Journal of Alloys and Compounds,1995,228(01):196. |
| [5] | Parikb N M;Humenik M .Cermets:Ⅱ,Wettability and microstructure studies in liquid phase sintering[J].Journal of the American Ceramic Society,1957,9:315. |
| [6] | Doi H.Advanced TiC and TiC-TiN based cermets[A].Adam Hilger Ltd,Bristol,1984:489. |
| [7] | Liu N;Zeng Q M;Huang X M .Microstructure in carbonitride cermets[J].Mater Sci Technol,2001,17(09):1050. |
| [8] | Lindahl P;Gustafson P;Rolander U;Stals L Andrén H -O .Microstructure of model cermets with high Mo or W content[J].International Journal of Refractory Metals and Hard Materials,1999,17:411. |
| [9] | Liu N;Xu Y D;Li Z H;Chen M H Li G H Zhang L D .Influence of molybdenum addition on the microstructure and mechanical properties of TiC-based cermets with nano-TiN modification[J].Ceramics International,2003,29:919. |
| [10] | Yu L X .The study of microstructure and mechanical properties of submicron grains Ti(C,N) based cermets at the condition of hot isostatic pressure[D].Huazhong University of Science and Technology,Wuhan,2004. |
| [11] | Zheng Y .The study of submicron grains Ti(C,N)based cermets composite[D].Huazhong University of Science and Technology,Wuhan,2002. |
| [12] | Yoshimura H;Sugizawa T;Nishigaki K;Doi H .Reaction occurring during sintering and the characteristics of TiC-20TiN-15WC-10TaC-9Mo-5 5Ni-11Co cermet[J].International Journal of Refractory Metals and Hard Materials,1983,33:170. |
| [13] | Warren R .Microstructural development during the liquid-phase sintering of two-phase alloys,with special reference to the NbC/Co system[J].Journal of Materials Science,1968,3:471. |
| [14] | Zhang S;Jana S .Four-point flexural of a molybdenum-free titanium carbonitride cermet[J].Journal of the American Ceramic Society,1995,53:837. |
| [15] | Mari D;Bolognini S;Feusier G;Cutard T Verdon C Viatte T Benoit W .TiMoCN based cermets Part Ⅰ:Morphology and phase composition[J].International Journal of Refractory Metals and Hard Materials,2003,21:37. |
| [16] | Mari D;Bolognini S;Feusier G;Cutard T Viatte T Benoit W .TiMoCN based cermets Part Ⅱ:Microstructure and room temperature mechanical properties[J].International Journal of Refractory Metals and Hard Materials,2003,21:47. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%