采用石墨模、钢模、水冷铜模和快速凝固甩带等方式，以金相显微镜、扫描电镜、X射线衍射等分析检测手段，系统研究了Sn-3.5Ag共晶合金在不同凝固速率的条件下，合金显微组织、相组成结构等的特征，分析了Sn-3.5Ag共晶合金在不同凝固速率下显微组织及相结构的变化规律。结果表明，Sn-3.5Ag共晶合金由β-Sn相和Ag3Sn相组成。石墨模冷却为规则的层片状共晶组织，钢模和水冷铜模冷却时，合金组织为细小的块状组织，快速甩带冷却为更加细小的块状组织。
Used the graphite die, steel mould, water-cooled copper mold and rapid solidification method, etc., and metallographic microscopy, scanning electron microscopy (SEM), X-ray diffraction analysis and detection methods to systematically study the characteristics of the microstructure, phase composition of Sn-3.5Ag eutectic alloy under the conditions of different solidification rate. The results show that Sn-3.5Ag eutectic alloy is composed byβ-Sn phase and Ag3Sn phase. The microstructure is the regular arrangement of lamellar-type structures for graphite die cooling; The microstructure is the small block structure for metal mould and water-cooled copper mold cooling; when the solidification rate reached rejection with rapid solidification, the microstructure is finer block structure.
参考文献
| [1] | Fawzy A;Fayek S A;Sobhy M.Tensile creep characteristics of Sn-3.5Ag-0.5Cu solder reinforced with nano-metric ZnO particles[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2014(603):1-10. |
| [2] | 莫文剑,王志法,王海山,杨会娟.Au-Ag-Si钎料合金的初步研究[J].贵金属,2004(04):45-51. |
| [3] | 张亮;Tu K N;郭永环 等.稀土元素Eu对SnAgCu钎料组织与性能影响[J].稀有金属,2015,39(1):11-15. |
| [4] | 马鑫,董本霞.无铅钎料发展现状[J].电子工艺技术,2002(02):47-52. |
| [5] | Kim K;Huh S;Suganuma K .Effects of cooling speed on microstructure and tensile properties of Sn-Ag-Cu alloys[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2002,333(1):106-114. |
| [6] | Lavernia E J;Srivatsan T .The rapid solidification processing of materials:science,principles,technology,advances,and applications[J].Journal of Materials Science,2010,45(2):287-325. |
| [7] | Zhang C;Sun J;Xu J.Formation and microstructure of nanoporous silver by dealloying rapidly solidified Zn-Ag alloys[J].Electrochimica Acta,2012(63):302-311. |
| [8] | 何纯孝;马光辰;王文娜.贵金属合金相图[M].北京:冶金工业出版社,1983:83-85. |
| [9] | 孙磊,张亮.Sn-Ag-Cu系无铅钎料的研究进展[J].电焊机,2014(12):6-13. |
| [10] | 邓忠民,吕贤勇,郑福前,谢明,刘建良,施安.某些金属元素对Ag-Sn合金内氧化速度的影响[J].贵金属,2001(01):8-11. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%