The precipitates on austenite grain boundaries in an Nb-V-Ti microalloyed steel have been investigated by transmission electron microscope （TEM） examination of carbon extraction replica. The replica was prepared from specimen etched with saturated picric solution rather than Nital which is conventionally used. Then particles on both grain boundaries and triple point of grain [aoundaries were clearly observed and identified as （Nb,Ti）（C, N） parti- cles. In case of conventional way, it is difficult to determine the location of particles with respect to austenite grain boundaries. The number of particles observed in new way developed was greatly reduced compared with that found in replica prepared by the conventional way, which may be caused by the dissolution of partial precipitates during the etching with longer time and at higher temperature involved in new way. Despite this, the new way developed pro- vides an effective way to determine the precipitate particles on austenite urain boundaries_
参考文献
| [1] | M. CHAPA;S. F. MEDINA;V. LOPEZ;B. FERNANDEZ .Influence of Al and Nb on Optimum Ti/N Ratio in Controlling Austenite Grain Growth at Reheating Temperatures[J].ISIJ International,2002(11):1288-1296. |
| [2] | J. ZHANG;T. N. BAKER .Effect of Equalisation Time on the Austenite Grain Size of Simulated Thin Slab Direct Charged (TSDC) Vanadium Microalloyed Steels[J].ISIJ International,2003(12):2015-2022. |
| [3] | S. AKHLAGHI;D.G. IVEY .PRECIPITATION BEHAVIOUR OF A GRADE 100 STRUCTURAL STEEL[J].Canadian Metallurgical Quarterly,2002(1):111-120. |
| [4] | Li Y;Wilson J A;Craven A J et al.Dispersion Strengthening in Vanadium Microalloyed Steels Processed by Simulated Thin Slab Casting and Direct Charging Part 1--Processing Parameters,Mechanical Properties and Microstrueture[J].Materials Science and Technology,2007,23(05):509. |
| [5] | Hu Zheng-Fei;Yang Zhen-Guo .Identification of the Precipitates by TEM and EDS in X20CrMoV12.1 After Long-Term Service at Elevated Temperature[J].Journal of Materials Engineering and Performance,2003(1):106-111. |
| [6] | Nawrocki J G;Dupont J N;Ackland D et al.Identification of Nano-Precipitates in a Ferritic Alloy Steel Using Secondary Electron STEM Imaging[J].Scripta Materialia,2001,45:139. |
| [7] | Li Y;Crowther D N;Mitchell P S et al.The Evolution of Microstructure During Thin Slab Direct Roiling Processing in Va nadium Microalloyed Steels[J].ISIJ International,2002,42(06):636. |
| [8] | MICHAEL T. NAGATA;JOHN G. SPEER;DAVID K. MATLOCK .Titanium Nitride Precipitation Behavior in Thin-Slab Cast High-Strength Low-Alloy Steels[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2002(10):3099-3110. |
| [9] | Kang YL.;Yu H.;Fu J.;Wang K.;Wang ZB. .Morphology and precipitation kinetics of AlN in hot strip of low carbon steel produced by compact strip production[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):265-271. |
| [10] | Pampa GHOSH;Chiradeep GHOSH;R. K. RAY .Precipitation in Interstitial Free High Strength Steels[J].ISIJ International,2009(7):1080-1086. |
| [11] | Andre C G;Caballero F G;Capdevila C et al.Revealing[Austenite Grain Boundaries by Thermal Etching:Advantage[and Disadvantage[J].Materials Characterization,2003,49:121. |
| [12] | Y. LI;J. A. WILSON;D. N. CROWTHER .The effects of vanadium, niobium, titanium and zirconium on the microstructure and mechanical properties of thin slab cast steels[J].ISIJ International,2004(6):1093-1102. |
| [13] | Crowther D N;Green M J W;Mitchell P S .The Influence of Composition on the Hot Cracking Susceptibility During Cast ing of Microalloyed Steels Processed to Simulate Thin Slab Casting Conditions[J].Materials Science Forum,1998,284- 286:469. |
| [14] | Moon J;Kim S;Jeong H et al.Influence of Nh Addition on the Particles Coarsening and Mierostructure Evolution in a Ti- Containing Steel Weld HAZ[J].Materials Science and Engineering,2007,454A 455A:648. |
| [15] | Sha Q Y;Qiao L;Xu R,et ah .Comparison of Grain Growth Between Fine Grained and Coarse Grained Austenite in a Nb V Ti Microalloyed Steel[J].Materials Science Forum,2010,638-642:3496. |
| [16] | Andre C G;Bartolome M J;Capdevila C et al.Metallographic Techniques for the Determination of the Austenite Grain Size in Medium-Carbon Microalloyed Steels[J].Materials Characterization,2001,46:389. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%