The visualization experiments were carried out to investigate the permeability of the high-permeable medium (HPM) and the roles of the peel ply and the HPM in the mold filling.The influence of process parameters on mold filling is discussed.Furthermore,the whole vacuum infusion molding process (VIMP) procedure is introduced in detail taking the manufacture of a model boat for example.
参考文献
| [1] | Kosmatka et al.Overview of the Development of the ARPA/BIR Composite Assault Bridge[J].International SAMPE Technical Conference,1996,28(08):1228-1239. |
| [2] | M Anderson et al.Development of Guidelines for the Vacuum Infusion Process[Z].Proceedings of FRP-2000.New-Castle,U.K,2000. |
| [3] | Elias J;Rigas.Development of A Novel Processing Technique for Vacuum Assisted Resin Transfer Molding (VARTM)[J].SAMPLE,2001:1086. |
| [4] | A Hammami;B R Gebart.Experimental Investigation of the Vacuum Infusion Process[J].Proceedings of ECCM-8,1998 |
| [5] | R.Mathur;D.Heider;C.Hoffmann;J.W.Gillespie;S.G.Advani;B.K.Fink .Flow Front Measurements and Model Validation in the Vacuum Assisted Resin Transfer Molding Process[J].Polymer Composites,2001(4):477-490. |
| [6] | Xiudong Sun;Shoujie Li;L James Lee .Mold Filling Analysis in Vacuum-Assisted Resin Transfer Molding,Part1:SCRIMP Based on a High-Permeable Medium[J].Polymer Composites,1998,19(06):807-817. |
| [7] | Gordon E Lacy;P Eng;Belle B Gall.Fabrication of a Large FRP Deck with Longitudinal and Transverse Stiffeners in a Single Onfusion[J].Composites,2000:141-149. |
| [8] | Adel Hammami .Permeability Assessment for the Vacuum Infusion Molding Process[Z].ICCM13,2001. |
| [9] | Yulu Ma;Roshan Shishoo .Permeability characterization of different architectural fabrics[J].Journal of Composite Materials,1999(8):729-750. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%