应用差示扫描量热法(DSC)研究了有无相容剂(m-TMI-PP)的木粉聚丙烯复合体系的等温结晶行为,采用Avrami方程处理等温结晶过程,计算结晶动力学参数.结果表明,随着结晶温度的升高,各体系的结晶速率下降,结晶速率常数K、n降低,半结晶时间t1/2增大.在同一结晶温度下,木粉起到成核剂的作用,提高了基体的结晶速率;m-TMI-PP的加入,使基体的结晶速率下降.纯PP的等温结晶过程具有异相成核与均相成核的机理,复合材料的等温结晶过程属于异相成核机理.
参考文献
| [1] | Arbelaiz A;Fernandez B;Ramos JA;Mondragon I .Thermal and crystallization studies of short flax fibre reinforced polypropylene matrix composites: Effect of treatments[J].Thermochimica Acta: An International Journal Concerned with the Broader Aspects of Thermochemistry and Its Applications to Chemical Problems,2006(2):111-121. |
| [2] | 李思远,杨伟,史炜,谢邦互,李忠明,冯建民,杨鸣波.木粉/聚丙烯复合材料力学性能及结晶行为研究[J].塑料工业,2005(z1):146-149. |
| [3] | Ajay Karmarkar;S.S. Chauhan;Jayant M. Modak .Mechanical properties of wood-fiber reinforced polypropylene composites: Effect of a novel compatibilizer with isocyanate functional group[J].Composites, Part A. Applied science and manufacturing,2007(1):227-233. |
| [4] | 戈明亮,徐卫兵.蒙脱土填充聚丙烯的等温结晶动力学[J].高分子材料科学与工程,2003(06):179-182. |
| [5] | 王重,王良诗,郭梅芳,盛建方,黄红红,殷旭红,魏东,徐焕,罗航宇,宋文波,吴红枚,乔金樑.乙烯含量对抗冲丙烯共聚物等温结晶行为的影响[J].高分子学报,2005(06):885-890. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%