Ion beam enhanced deposition (IBED) was employed to increase the fretting fatigue resistance of Ti6AI4V. CrN and TiN hard coatings were applied on the base material and shot peening was combined with the hard coatings to study the duplex effect on fretting fatigue resistance, The IBED coatings exhibited a good bonding strength. They did not spall off even after shot peening. However, an optimum composition of CrN showed better fretting fatigue resistance than that of TiN with the same processing parameters.
参考文献
| [1] | SChakravarty RG rews;PCPatnaik;AKKoul .[J].Journal of Metals,1995,4:31. |
| [2] | L Xue;A K Koul;M Bibby;W.Wallace M.Lslam.in Proc Conf[C].Computer Methods and Experimental Measurement for Surface Treatment Effect Ⅱ Milan Italy,1995:265. |
| [3] | Liu Daoxin,Zhang Biqiang,Tang Bin,He Jiawen.Shot peening and solid lubricating on Ti6Al4V fretting fatigue[J].稀有金属(英文版),1999(03):229. |
| [4] | JiawenHE;Kewei XU;Naisai HU .[J].Surface and Coatings Technology,1997,97:295. |
| [5] | Navinsek .[J].Surface and Coatings Technology,1995,74:155. |
| [6] | XiaodongZHU;Kewei XU.in Proc of the Tenth International Conf on Surface Modification Technologies[J].Singapore,1997:797. |
| [7] | HMohracher;JP Celis;JRRoos .[J].Tribology International,1995,28:269. |
| [8] | JWHe;NSHu;DQZhang .[J].西安交通大学学报,1992,26:25. |
| [9] | 刘道新,何家文.喷丸强化因素对Ti合金微动疲劳抗力的作用[J].金属学报,2001(02):156-160. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%