采用超音速火焰喷涂技术在不同氧气流量条件下制备3种TiB2-40Co涂层,采用扫描电镜、X射线衍射仪研究了涂层的组织和相结构,运用压痕法测定了涂层的显微硬度,通过水淬法测试涂层的抗热震性能,并研究涂层的耐熔融铝硅腐蚀性能.结果表明,3种TiB2-40Co涂层具有叠层状结构,No.1涂层最为致密,其孔隙率仅为0.286％;涂层的主要物相为TiB2和Co;显微硬度值分别为697±60 HV0.3、523±86 HV0.3和648±38 HV0.3;No.1涂层具有最好的抗热震性能;经过120 h熔融铝硅腐蚀后发现,3种涂层均具有良好的抗熔融铝硅腐蚀性能,其中No.1涂层试样耐腐蚀性能最好.
参考文献
| [1] | 秦培煜,周世权.能源材料的研究现状及发展前景[J].节能,2002(05):5-7. |
| [2] | Dincer Dost;Li X G .Thermal Energy Storage Application from an Energy Saving Perspective[J].International Journal Global Energy Issues,1997,9(4-6):351-364. |
| [3] | Hasnain S M .Review on Sustainable Thermal Energy Storage Technology,Part 1:Heat Storage Materials and Techniques[J].Energy Conversion & Management,1998,39(11):1127-1138. |
| [4] | Paris J;Falardeau M;Cecil V .Thermal Storage by Latent Heat:A Viable Option for Energy Conservation in Buildings[J].ENERGY SOURCES,1993,15(01):86-93. |
| [5] | 张寅平;胡汉平;孔祥东.相变储能-理论和应用[M].合肥:中国科学技术大学出版社,1996:18-21. |
| [6] | 贾宝平 .Ti基TiB<,2>渗层材料在铝电解惰性阴极方面的应用研究[D].中南大学,2004. |
| [7] | 王宝龙,赵俊国,王文武.TiB2材料的特性及其在铝工业中的应用[J].轻金属,2004(05):23-26. |
| [8] | 洪长青,韩杰才,张幸红,赫晓东,孟松鹤.浸渗法制备双连续TiB2/（Cu,Ni）复合材料的组织和性能[J].材料科学与工艺,2006(02):151-154. |
| [9] | 刘业翔;邹忠 .导电陶瓷开发与应用的最新进展[J].稀有金属,1996,20(06):438-443. |
| [10] | 洪长青,张幸红,韩杰才,赫晓东,曲伟.二次热压烧结对燃烧合成TiB2-Cu-Ni复合材料组织及性能的影响[J].材料科学与工艺,2004(01):4-7. |
| [11] | 赵文轸.超音速火焰喷涂--热喷涂领域的最新技术[J].材料保护,1997(12):19. |
| [12] | A. Dolatabadi;J. Mostaghimi;V. Pershin .Effect of a cylindrical shroud on particle conditions in high velocity oxy-fuel (HVOF) spray process[J].Journal of Materials Processing Technology,2003(1/3):214-224. |
| [13] | Horlock AJ.;McCartney DG.;Shipway PH.;Wood JV. .Thermally sprayed Ni(Cr)-TiB2 coatings using powder produced by self-propagating high temperature synthesis: microstructure and abrasive wear behaviour[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):88-98. |
| [14] | Jones M.;Shipway PH.;McCartney DG.;Wood JV.;Horlock AJ. .A comparison of the abrasive wear behaviour of HVOF sprayed titanium carbide- and titanium boride-based cermet coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(2):1009-1016. |
| [15] | Lotfi B;Shipway P H;McCartney D G et al.Abrasive wear behavior of Ni (Cr)-TiB2 coatings deposited by HVOF spraying of SHS-derived ceramic powders[J].WEAR,2003,254:340-349. |
| [16] | 李方坡,王引真,孙永兴,潘蛟亮,高海军.反应超音速火焰喷涂TiC-TiB2-Ni涂层的组织性能[J].中国石油大学学报（自然科学版）,2009(01):99-102,108. |
| [17] | 段忠清,张宝霞,王泽华,林萍华.Cr_2O_3-8%TiO_2等离子喷涂层结合强度、表面状态与喷涂层厚度的关系[J].材料保护,2010(01):60-61. |
| [18] | 刘建 .不锈钢基体表面陶瓷涂层的制备及性能表征[D].北京化工大学,2011. |
| [19] | 王继东 .等离子喷涂ZrO<,2>复合涂层抗热震性能的研究[D].北京工业大学,2010. |
| [20] | 王赫莹 .热镀锌锅内壁陶瓷涂层制备及其耐锌蚀机理的研究[D].沈阳工业大学,2007. |
| [21] | 付志敏 .超音速火焰喷涂热障涂层抗氧化性能及热震性能的研究[D].河北工业大学,2010. |
| [22] | 张剑豪,刘宁,王全.Ti （C,N）基金属陶瓷热震疲劳裂纹扩展速率研究[J].合肥工业大学学报（自然科学版）,2000(03):318-322. |
| [23] | Mesrati N;Saif Q;Treheux D;Moughil A;Fantozzi G;Vincent A .Characterization of thermal fatigue damage of thermal barrier produced by atmospheric plasma spraying[J].Surface & Coatings Technology,2004(2/3):185-193. |
| [24] | Khan AN;Lu J .Thermal cyclic behavior of air plasma sprayed thermal barrier coatings sprayed on stainless steel substrates[J].Surface & Coatings Technology,2007(26):4653-4658. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%