本文以片状氧化铝单晶颗粒为晶种,CaO-Al2O3-SiO2(CAS)为添加剂,研究了晶种加入对氧化铝陶瓷显微结构与性能的影响.研究发现,晶种和CAS的共同作用促进了片状晶粒的生长.随晶种量增加,片状晶粒粒径分布的峰值和径厚比分布的峰值先增后降.晶种加入对氧化铝陶瓷相对密度和硬度影响不大,但断裂强度与断裂韧性随晶种量的增加呈现先增后降的趋势.加入15wt%晶种时陶瓷的断裂强度与断裂韧性达到最大(分别为430MPa与5.78MPa·m1/2),比未加晶种的陶瓷提高了23%与38%.
参考文献
| [1] | Yasuoka M.;Brito ME.;Kanzaki S.;Hirao K. .HIGH-STRENGTH AND HIGH-FRACTURE-TOUGHNESS CERAMICS IN THE AL2O3/LAAL11O18 SYSTEMS[J].Journal of the American Ceramic Society,1995(7):1853-1856. |
| [2] | Horn DS.;Messing GL. .ANISOTROPIC GRAIN GROWTH IN TIO2-DOPED ALUMINA[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1995(1/2):169-178. |
| [3] | Yi-quan Wu;Yu-feng Zhang;Xiao-xian Huang .Microstructural development and mechanical properties of self-reinforced alumina with CAS addition[J].Journal of the European Ceramic Society,2001(5):581-587. |
| [4] | Hirao K.;Brito ME.;Kanzaki S.;Ohashi M. .PROCESSING STRATEGY FOR PRODUCING HIGHLY ANISOTROPIC SILICON NITRIDE[J].Journal of the American Ceramic Society,1995(6):1687-1690. |
| [5] | Hirao K;Nagaoka T;Brito M.E;Kanzaki S .Microstructure control of silicon nitride by seeding with rodlike β-silicon nitride particles[J].Journal of the American Ceramic Society,1994,77(07):1857-1862. |
| [6] | Yoshizawa Y;Toriyama M;Kanzaki S .Preparation of high fracture toughness alumina sintered bodies from Bayer aluminum hydroxide[J].Journal of the Ceramic Society of Japan,1998,106(12):1172-1177. |
| [7] | Xie Z.P;Lu J.W;Huang Y;Cheng Y.B .Influence of α-Alumina seed on the morphology of grain growth in alumina ceramics from Bayer aluminum hydroxide[J].Materials Letters,2003,57(16-17):2501-2508. |
| [8] | Becher Paul F .Microstructural design of toughened ceramics[J].Journal of the American Ceramic Society,1991,74(02):255-269. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%