欢迎登录材料期刊网

材料期刊网

高级检索

采用电化学阻抗谱(EIS)、动电位极化曲线、循环极化曲线(CP)研究了316L,2205,254SMo和2507不锈钢在含不同浓度Cl-的高炉煤气管道冷凝模拟液中的腐蚀行为.结果表明,随着Cl-浓度的增加,该四种不锈钢电极的电荷转移电阻均逐渐减小,其中2507不锈钢电极的电荷转移电阻最大,其次为254SMo不锈钢,而316L不锈钢的最小.316L不锈钢电极的极化曲线没有钝化区,腐蚀电流密度较大;254SMo和2507不锈钢电极的极化曲线存在明显的钝化区,显示较好的耐蚀性.254SMo和2507不锈钢电极的循环极化曲线中的折回段几乎沿原曲线逆向变化,显示其表面钝化膜破坏后的修复能力强;2205不锈钢回扫电流始终大于正扫电流,其钝化膜修复能力相对较差.

参考文献

[1] A. Pardo;M.C Merino;A.E. Coy;F. Viejo;R. Arrabal;E. Matykina .Pitting corrosion behaviour of austenitic stainless steels - combining effects of Mn and Mo additions[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2008(6):1796-1806.
[2] 杨瑞成,毕海娟,牛绍蕊,靳塞特,申鹏.409L和410S热轧不锈钢在5种介质中的腐蚀行为[J].材料保护,2011(09):76-78.
[3] 聂宝维,刘立,屈撑囤,何飞,李辉.双河联合站回注水系统腐蚀因素[J].腐蚀与防护,2012(05):437-440.
[4] 张国超,林冠发,雷丹,张娟涛.超级13Cr不锈钢的临界点蚀温度[J].腐蚀与防护,2012(09):777-779.
[5] 汪轩义,吴荫顺,张琳.316L不锈钢钝化膜在Cl-介质中的耐蚀机制[J].腐蚀科学与防护技术,2000(06):311.
[6] 王敏,姚长贵,贾利星.关于航空航天用321与304N钢的对比分析[J].热加工工艺,2012(06):57-59.
[7] 吕曼祺,陈四红,董加胜,杨柯.含Cu铁素体抗菌不锈钢的抗菌性能[J].材料研究学报,2005(06):581-588.
[8] Deepika Sachdeva .Insights into microstructure based corrosion mechanism of high pressure die cast AM50 alloy[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2012(Jul.):18-31.
[9] 李谋成,林海潮,曹楚南.碳钢在土壤中腐蚀的电化学阻抗谱特征[J].中国腐蚀与防护学报,2000(02):111-117.
[10] Jin Xu;Kaixiong Wang;Cheng Sun;Fuhui Wang;Ximing Li;Jiaxing Yang;Changkun Yu .The effects of sulfate reducing bacteria on corrosion of carbon steel Q235 under simulated disbonded coating by using electrochemical impedance spectroscopy[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2011(4):1554-1562.
[11] J. R. Morlidge;P. Skeldon;G. E. Thompson;H. Habazaki;K. Shimizu;G. C. Wood .Gel formation and the efficiency of anodic film growth on aluminium[J].Electrochimica Acta,1999(14):2423-2435.
[12] B. Zaid;D. Saidi;A. Benzaid;S. Hadji .Effects of pH and chloride concentration on pitting corrosion of AA6061 aluminum alloy[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2008(7):1841-1847.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%