采用表面活性元素Sb微合金化的方法制备了Mg-5A1-2Sr-χSb（χ=0，0．3，0．6，1．0）合金，通过金相显微镜、X射线衍射仪、扫描电镜和力学性能测试等方法研究了sb含量对Mg～5A1—2Sr合金微观组织和力学性能的影响,结果表明，Mg-5A1-2Sr-χSb合金铸态组织主要由枝晶α-Mg、沿晶界或分布在枝晶闾的层状或离异共晶的Al4Sr相、块状三元Mg9Al3Sr相（T相）和颗粒状SbSr2相组成，随着Sb含量的增加，Sb-Sr，相的数量逐渐增多，T相逐渐减少，Sb的质量分数为0．6％时，断续分布的Al4Sr相和细小弥散分布的Sb-Sr，相能够提高Mg-5A1-2Sr合金的室温和高温（150℃）机械性能。
Mg - 5A1 -2Sr - xSb ( χ = 0,0.3,0.6,1.0 ) alloys were prepared by microalloying method of surface active elements Sb. The effects of Sb content on the microstrueture and mechanical properties of Mg-5A1-2Sr were studied by optical microscope, X-ray diffraction, scanning electron microscopy (SEM) and mechanical property testing ,etc. The results indicate that the as-cast microstructure of Mg -5A1 -2Sr alloy consists of dendrite ot-Mg, lamellar or divorced eutectic AlaSr which distributed along the grain boundaries or between dendrites, ternary bulky MggA13 Sr phase (T phase) and granular SbSr2 phase. With the increase of Sb content, the number of SbSr2 phase gradually increases and T phase gradually reduces. With 0.6% Sb addi tion, the mechanical properties of Mg -5A1 -2St alloy at room temperature and high temperature ( 150 ℃ ) are both improved,which attribute to the discontinuous distribution AlaSr phase and fine dispersed SbSr2 phase.
参考文献
| [1] | 刘艳改,熊守美,黄朝晖,房明浩,袁建路.合金元素对AM60B镁合金性能的影响[J].材料科学与工艺,2008(04):511-514. |
| [2] | 袁广银,曾小勤,吕宜振,丁文江,孙扬善.锑合金化对镁铝基合金力学性能的改善作用[J].材料工程,2001(04):10-15. |
| [3] | Srinivasan A;Swaminathan J;Pillai UTS;Guguloth K;Pai BC .Effect of combined addition of Si and Sb on the microstructure and creep properties of AZ91 magnesium alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):86-91. |
| [4] | HongBin Liu;NingNing Gong;Lei Pang;XingGuo Zhang .Microstructure and mechanical properties of as-cast AZ31 with the addition of Sb[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):254-259. |
| [5] | 刘子利,潘青林,陈照峰,陶杰.Sb对AE41镁合金组织和性能的影响[J].航空材料学报,2005(06):1-4,10. |
| [6] | 刘子利,陈照峰,刘希琴,陶杰.Sb合金化对AE41镁合金耐热性能的影响[J].材料研究学报,2006(02):186-190. |
| [7] | 崔红卫,李红,高巧春,董抒华,李蛟.合金元素Sb对AM50镁合金组织和性能的影响[J].铸造技术,2009(06):791-795. |
| [8] | 周健,白晶,薛烽,孙扬善,陶卫健.Al含量对耐热Mg-Al-Sr合金显微组织及力学性能的影响[J].航空材料学报,2009(04):6-11. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%