利用无压烧结制备含CuO的SnO2高致密陶瓷材料.研究表明,CuO的掺杂对SnO2烧结致密度有很大的提高,烧结致密度与CuO添加量以及液相烧结工艺有着密切的关系,掺杂0.5%(摩尔分数)CuO的SnO2基陶瓷样品密度为6.88g·cm-3,相对密度达到98.97%,最佳的烧结温度为1250℃.其烧结机理为高温下生成共晶CuO-Cu2O液相大大促进了陶瓷体的烧结性能.
参考文献
[1] | Zaharescu M;Mihaiu S;Zuca S et al.[J].Journal of Materials Science,1991,26:1666. |
[2] | Anastasiou A;Lee M H J;Leach C et al.[J].Journal of the European Ceramic Society,2004,24:1171. |
[3] | Inada Kimura S;Yamaguchi T .[J].Journal of Materials Science,1989,24:220. |
[4] | Torvela K;Leppavuori S .[J].Int J High Tech Ceram,1987,3:309. |
[5] | Kimura K;Inada S .[J].Journal of Materials Science,1989,24(01):220. |
[6] | Cerri JA.;Gouvea D.;Longo E.;Varela JA.;Leite ER. .EFFECT OF COBALT(II) OXIDE AND MANGANESE(IV) OXIDE ON SINTERING OF TIN(IV) OXIDE[J].Journal of the American Ceramic Society,1996(3):799-804. |
[7] | Yuan D W;Wang S F;Huebner W et al.[J].Journal of Materials Research,1993,8(07):1675. |
[8] | Jearoa me Lalande;Rolande Ollitrault-Fichet;Philippe Boch .[J].Journal of the European Ceramic Society,2000,20:2415. |
[9] | Nisiro D.;Fabbri G.;Celotti GC.;Bellosi A. .Influence of the additives and processing conditions on the characteristics of dense SnO2-based ceramics[J].Journal of Materials Science,2003(12):2727-2742. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%