本研究中选用石英和焦炭为原料、天然锆英石为添加剂,采用XRD、SEM和EDS等分析方法,研究了反应温度和锆英石添加量对石英碳热还原氮化产物影响.研究结果表明:在0.13 MPa的流动氮气气氛中,反应温度在1450～1550℃时,石英的碳热还原氮化产物中含有Si2N2O、β-SiC和β-Si3N4物相；当反应温度为1600℃时,石英的碳热等在1600℃条件下,石英碳热还原氮化产物主要含有柱状β-Si3N4和少量纤维状β-SiC物相；当添加10wt％的天然锆英石时,产物的主要成分为β-Si3N4 、ZrN以及少量βSiC物相；当锆英石添加量为20wt％到50wt％时,产物中不仅含有β-Si3N4和ZrN物相,还存在c-ZrO2,m-ZrO2,Si2N2O及β-SiC等物相.
参考文献
| [1] | 于方丽,于平平,王俭志,杨建锋.烧结助剂及β-Si3N4添加量对多孔氮化硅陶瓷性能的影响[J].人工晶体学报,2011(03):772-778,783. |
| [2] | Koji Takahashi;Hisashi Murase;Shoko Yoshida .Improvement of static fatigue strength of Si_3N_4/SiC crack-healed under cyclic stress[J].Journal of the European Ceramic Society,2005(11):1953-1959. |
| [3] | X.J. Zhao;D.L. Chen;H.Q. Ru .Zirconium nitride nano-particulate reinforced Alon composites: Fabrication, mechanical properties and toughening mechanisms[J].Journal of the European Ceramic Society,2011(5):883-892. |
| [4] | Deng Jianxin;Liu Jianhua;Zhao Jinlong .Wear mechanisms of PVD ZrN coated tools in machining[J].International Journal of Refractory Metals & Hard Materials,2008(3):164-172. |
| [5] | Wang F;Qin XF;Jin GQ;Wang YY;Guo XY .Synthesis and characterization of Si3N4 thin nanobelts via direct nitridation of Si powders[J].Physica, E. Low-dimensional systems & nanostructures,2008(1):120-123. |
| [6] | F. Wang;G.-Q. Jin;X.-Y. Guo .Sol-gel synthesis of Si_3N_4 nanowires and nanotubes[J].Materials Letters,2006(3):330-333. |
| [7] | Kh.V. Manukyan;S.L. Kharatyan;G. Blugan .Combustion synthesis and compaction of Si_3N_4-TiN composite powder[J].CERAMICS INTERNATIONAL,2007(3):379-383. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%