欢迎登录材料期刊网

材料期刊网

高级检索

采用大气等离子喷涂制备了NiCrBSi/WC-Ni复合涂层,并采用高频感应加热的方法对涂层进行了重熔处理.与NiCrBSi涂层进行对比,分析了涂层截面的显微组织及涂层与基体界面的结合状况,对重熔前后的两种涂层进行了划痕测试,并对大气等离子喷涂制备的两种涂层在不同载荷进行了耐磨性测试.结果表明,感应重熔使得涂层由机械结合变为冶金结合,增强了涂层的内聚力;感应重熔后,NiCrBSi/WC-Ni复合涂层的附着力大幅度提高,涂层的孔L隙率和显微硬度降低.NiCrBSi/WC-Ni复合涂层的显微硬度和耐磨性远高于NiCrBSi合金涂层.WC-Ni的添加没有对涂层的摩擦系数产生明显的影响.

参考文献

[1] Richards, Bradley T.;Zhao, Hengbei;Wadley, Haydn N. G..Structure, composition, and defect control during plasma spray deposition of ytterbium silicate coatings[J].Journal of Materials Science,201524(24):7939-7957.
[2] Ctibor, Pavel;Kotlan, Jiri;Pala, Zdenek;Sedlacek, Josef;Hajkova, Zuzana;Grygar, Tomas Matys.Calcium titanate (CaTiO3) dielectrics prepared by plasma spray and post-deposition thermal treatment[J].Materials Research Bulletin: An International Journal Reporting Research on Crystal Growth and Materials Preparation and Characterization,2015Dec.(Dec.):123-132.
[3] Ghadami, F.;Sohi, M. Heydarzadeh;Ghadami, S..Effect of bond coat and post-heat treatment on the adhesion of air plasma sprayed WC-Co coatings[J].Surface & Coatings Technology,2015:289-294.
[4] Chun Guo;Jiansong Zhou;Jianmin Chen;Jierong Zhao;Youjun Yu;Huidi Zhou.High temperature wear resistance of laser cladding NiCrBSi and NiCrBSi/WC-Ni composite coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,20117/8(7/8):492-498.
[5] Serres, N.;Hlawka, F.;Costil, S.;Langlade, C.;Machi, F..Microstructures and environmental assessment of metallic NiCrBSi coatings manufactured via hybrid plasma spray process[J].Surface & Coatings Technology,20104(4):1039-1046.
[6] Niranatlumpong, P.;Koiprasert, H..The effect of Mo content in plasma-sprayed Mo-NiCrBSi coating on the tribological behavior[J].Surface & Coatings Technology,20102(2):483-489.
[7] X.C. Zhang;B.S. Xu;F.Z. Xuan;S.T. Tu;H.D. Wang;Y.X. Wu.Porosity And Effective Mechanical Properties Of Plasma-sprayed Ni-based Alloy Coatings[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,20098(8):4362-4371.
[8] J. M. Miguel;J. M. Guilemany;S. Vizcaino.Tribological study of NiCrBSi coating obtained by different processes[J].Tribology International,20033(3):181-187.
[9] Houdkova, Sarka;Smazalova, Eva;Vostrak, Marek;Schubert, Jan.Properties of NiCrBSi coating, as sprayed and remelted by different technologies[J].Surface & Coatings Technology,2014:14-26.
[10] Nicolas Serres;Francoise Hlawka;Sophie Costil;Cecile Langlade;Frederique Machi.An investigation of the mechanical properties and wear resistance of NiCrBSi coatings carried out by in situ laser remelting[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,20119/10(9/10):640-649.
[11] 张红霞;赵红利;罗成;赵俊平.感应重熔工艺对Ni60合金涂层质量的影响[J].金属热处理,2008(8):130-133.
[12] 陆在平;田玉亮;朱成才.高频感应重熔Ni60AA合金粉末涂层的研究[J].热喷涂技术,2012(1):44-46.
[13] Guo, C.;Chen, J.;Zhou, J.;Zhao, J.;Wang, L.;Yu, Y.;Zhou, H..Effects of WC-Ni content on microstructure and wear resistance of laser cladding Ni-based alloys coating[J].Surface & Coatings Technology,20128/9(8/9):2064-2071.
[14] Zhang, Z. Q.;Wang, H. D.;Xu, B. S.;Zhang, G. S..Characterization of microstructure and rolling contact fatigue performance of NiCrBSi/WC-Ni composite coatings prepared by plasma spraying[J].Surface & Coatings Technology,2015:60-68.
[15] Zhang, Zhi-qiang;Wang, Hai-dou;Xu, Bin-shi;Zhang, Guo-sheng.Investigation on influence of WC-Ni addition on rolling contact fatigue behavior of plasma sprayed Ni-based alloy coating[J].Tribology International,2015:509-518.
[16] Nicolas Serres;Francoise Hlawka;Sophie Costil;Cecile Langlade;Frederique Machi.Microstructures and mechanical properties of metallic NiCrBSi and composite NiCrBSi-WC layers manufactured via hybrid plasma/laser process[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,201112(12):5132-5137.
[17] 张梦清;张伟;于鹤龙;张攀.不同方法制备NiCrBSi涂层的结构与摩擦学性能[J].中国表面工程,2014(6):75-81.
[18] 张红霞;赵红利;夏建元;杨珊珊.感应重熔Ni60/WC涂层的界面组织与耐磨性研究[J].特种铸造及有色合金,2011(2):107-109.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%