为研究纤维涂层法制备SiCf／Cu复合材料的性能特点，通过磁控溅射法先后将Ti6A14V界面改性层和基体Cu涂层涂覆到SiC纤维表面，并通过真空热压法将被涂覆的纤维制备成SiC，／Cu复合材料，对Ti6A14V涂层、Cu涂层以及复合材料进行了微观分析，并测试了复合材料的拉伸强度．砚究表明，复合材料的Cu基体由致密而细小的晶粒组成；Ti6AMV提高了纤维／基体界面结合强度，复合材料轴向抗拉强度高达500MPa，界面脱粘主要发生在纤维表面的碳涂层与纤维之间。
To study the properties of SiCf/Cu composite Prelpared by fiber coating method, Ti6A14V interracial modification coating and the matrix copper coating were successively deposited onto SiC fibers via magnetron sputtering, and the coated fibers were used to fabricate copper matrix, composite by vacuum hot pressing process. The microstructures of Ti6A14V and Copper coatings as well as the composite were analyzed, and the tensile strength of the composite was determined. The results indicate: that the copper matrix composite is composed of compact and fine grains, and the axial tensile bonding strength is significantly improved by Ti6Ai4V carbon layer and SiC fiber. strength is up to 500 MPa as the fiber/matrix interfacial interlayer. The linterfacial dehonding occurs between thecarbon layer and SiC fiber.
参考文献
| [1] | You JH.;Bolt H. .Overall mechanical properties of fiber-reinforced metal matrix composites for fusion applications[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2002(1):14-20. |
| [2] | Brendel A;Popescu C;Leyens C;Woltersdorf J;Pippel E;Bolt H .SiC-fibre reinforced copper as heat sink material for fusion applications[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2004(0):804-808. |
| [3] | Brendel, A;Popescu, C;Schurmann, H;Bolt, H .Interface modification of SiC-fibre/copper matrix composites by applying a titanium interlayer[J].Surface & Coatings Technology,2005(1/4):161-164. |
| [4] | Brendel A;Woltersdorf J;Pippel E;Bolt H .Titanium as coupling agent in SiC fibre reinforced copper matrix composites[J].Materials Chemistry and Physics,2005(1):116-123. |
| [5] | Luo Xian;Yang Yanqing;Mei Yunwang .Titanium interlayers as adhesion promoters for SiC_f/Cu composites[J].Scripta materialia,2007(7):569-572. |
| [6] | X. Luo;Y.Q. Yang;Y.C. Liu;Z.J. Ma;M.N. Yuan;Y. Chen .The fabrication and property of SiC fiber reinforced copper matrix composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1-2):244-250. |
| [7] | 罗贤,杨延清,原梅妮,李建康,陈彦,李晓芹.SiC_f/Ti6Al4V/Cu复合材料的界面行为及力学性能[J].中国有色金属学报,2009(10):1777-1781. |
| [8] | Xian Luo;Yanqing Yang;Jiankang Li;Meini Yuan;Bin Huang;Yan Chen .An analysis of thermal residual stresses in SiC_f/Cu composites when TiC or Ni as binder[J].Materials & design,2008(9):1755-1761. |
| [9] | Ma Zhijun;Yang Yanqing;Du Jiang .The effect of magnetron sputter parameter on fiber coating character[J].Materials Letters,2004(15):2118-2121. |
| [10] | 骆军,朱航天,梁敬魁.晶粒尺寸和应变的X射线粉末衍射法测定[J].物理,2009(04):267-275. |
| [11] | 刘德宝,崔春翔.颗粒种类及制备工艺对铜基材料性能影响[J].材料科学与工艺,2005(04):347-351. |
| [12] | LUO Xian,YANG Yanqing,WANG Chen,LOU Juhong,XUE Chunling.C/Ti/Cu interfacial reaction in SiCf/Cu composites[J].稀有金属（英文版）,2011(04):396-400. |
| [13] | 文琼 .SiC纤维增强Ti基复合材料的微观组织[D].西北工业大学,2005. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%