抽拉速率对镍基单晶高温合金组织和偏析的影响

稀有金属材料与工程, 2017, 46(5): 1245-1250.

抽拉速率对镍基单晶高温合金组织和偏析的影响

周雪峰 ^1, , 陈光 ^2, , 冯亚亚 ^3, , 祁志祥 ^4, , 李沛 ^5, , 成家林 ^6,

1.南京理工大学材料评价与设计教育部工程研究中心,江苏南京210094;常熟理工学院,江苏常熟215500

2.南京理工大学材料评价与设计教育部工程研究中心,江苏南京,210094

3.南京理工大学材料评价与设计教育部工程研究中心,江苏南京,210094

4.南京理工大学材料评价与设计教育部工程研究中心,江苏南京,210094

5.南京理工大学材料评价与设计教育部工程研究中心,江苏南京,210094

6.南京工程学院,江苏南京,211167

基金项目: Cooperative Innovation Fund of Jiangsu Province(BY2014004-09) Foundation of Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology(ASMA201403) Jiangsu Province Key Technology R&D (industry) Program(BE201217) Science and Technology Innovation Fund Program(CX2011028,CX2011029)

关键词：镍基单晶高温合金 , 抽拉速率 , 凝固组织 , 成分偏析

Effects of Elevated Withdrawal Rate on the Microstructure and Segregation Behavior of a Nickel-base Single Crystal Superalloy

Keywords： nickel-base single crystal superalloys , withdrawal rate , solidification microstructure , composition segregation

研究了抽拉速率对一种镍基单晶高温合金组织和成分偏析的影响.结果表明:随着抽拉速率的提高,一次枝晶间距与二次枝晶间距缩小,y相尺寸减小;y/y共晶随着抽拉速率的提高,尺寸变小,但体积分数增加:同时,随着抽拉速率的提高,单晶成分偏析增加.

The effects of withdrawal rate on the microstructure and segregation behavior of a nickel-base single crystal superalloy were investigated.The results indicate that by increasing the withdrawal rate,the primary dendrite arm spacing (λ1),the secondary dendrite arm spacing (λ2) and the size of 7'precipitates decrease gradually.Moreover,the shape of γ'precipitates is more regular at higher withdraw rates.Also,the size of γ/γ'eutectic becomes small while the total volume fraction increases.Considering the composition segregation is determined by diffusion time of the constituent elements,when withdrawal rate is elevated,diffusion time of solutes decreases,and the effects of segregation are enhanced.

参考文献

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网