腔式吸热器是塔式太阳能热发电系统中非常关键的一个部件,它的性能直接关系到整个发电系统的效率,因此对吸热器内的太阳能热流密度及吸热器的效率进行计算在吸热器设计中便显得尤为重要.本文提出了一种综合计算的方法来解决这个问题:首先利用蒙特卡罗(Monte Carlo)方法来模拟吸热器内太阳光束的行为,得到吸热器内的太阳能热流密度分布;然后利用流动换热的相应公式计算出吸热器内吸热管道的壁温;接着再对吸热器内空气的流场进行计算得到吸热器管道的热损失.利用这种综合计算的方法可以估算出太阳能在吸热器表面的热流密度分布以及吸热器的效率,为吸热器设计提供一定的理论指导.
参考文献
| [1] | Modest MF.Radiative Heat Transfer[M].McGraw-Hill,Inc,1993:669-700. |
| [2] | Petukhov B S;Popov V N .Theoretical Calculation of Heat Exchange in Turbulent Flow in Tubes of an Incompressible Fluid with Variable Physical Properties[J].High Temperature,1963,1(01):69-83. |
| [3] | Gnielinski V .New Equations for Heat and Mass Transfer in Turbulent Pipe and Channel Flow[J].International Chemical Engineer,1976,16:59-368. |
| [4] | Hsu Y Y .On the Size Range of Active Nucleation Cavities on a Heating Surface[J].Journal of Heat Transfer,1962,84:07-216. |
| [5] | Sato T;Matsumura H .On the Condition of Incipient Subcooled Boiling with Forced Convection[J].Bulletin of JSME,1964,7(26):392-398. |
| [6] | Kandlikar S G .Heat Transfer Characteristics in Partial Boiling,Fully Developed Boiling,and Significant Void Flow Regions of Subcooled Flow Boiling[J].Journal of Heat Transfer,1998,120:95-401. |
| [7] | Bowring W R .Physical Model of Bubble Detachment and Void Volume in Subcooled Boiling.[OECD Halden Reactor Project Report No.PR-10][R]. |
| [8] | Kandlikar S G .Development of a Flow Boiling Map for Subcooled and Saturated Flow Boiling of Different Fluids Inside Circular Tubes[J].Journal of Heat Transfer,1991,113:90-200. |
| [9] | 陶文铨.数值传热学[M].西安:西安交通大学出版社,2001:162-165. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%