研究了超纯21%Cr铁素体不锈钢精轧温度对织构演变规律和成形性能的影响.将粗轧板坯切块并在900～750℃范围内进行精轧,随后经相同的热轧退火、酸洗、冷轧及退火处理,系统研究了试样的宏观织构、显微织构和成形性能的变化规律.结果表明:精轧温度对铁索体不锈钢的织构演变有重要影响,降低热轧精轧温度有利于增加热轧退火板中{111}再结晶织构组分;冷轧及冷轧退火板的织构分布具有明显的遗传性,热轧板中较高的{111}再结晶织构组分,促进了冷轧退火板中{111}再结晶织构的生成,从而提高了铁索体不锈钢的成形性能.
参考文献
| [1] | 陆世英;张廷凯;康喜范.不锈钢[M].北京:原子能出版社,1995 |
| [2] | Yoshihiro Yazawa;Yoshihiro Ozaki;Yasushi Kato;Osamu Furukimi .Development of ferritic stainless steel sheets with excellent deep drawability by (111} recrystallization texture control[J].JSAE review,2003(4):483-488. |
| [3] | Lo K H;Shek C H;Lai J K L .Recent Developments in Stainless Steels[J].Materials Science and Engineering R:Reports,2009,65(4-6):39. |
| [4] | Yoshihiro Yazawa .Development of Ti-bearing High Performance Ferritic Stainless Steels R430XT and RSX-1[J].Kawasaki Steel Technical Report,1999(40):0-0. |
| [5] | 顾佳卿,朱朝明,余海峰,胡锦程,华晓宇.终轧温度对SUS444铁素体不锈钢抗起皱性能的影响[J].钢铁,2009(11):71-74. |
| [6] | M.R.Barnett .Role of In-grain Shear Bands in the Nucleation of <111>∥ND Recrystallization Textures in Warm Rolled Steel[J].ISIJ International,1998(1):78-85. |
| [7] | H. G. Kang;M. Y. Huh;S. H. Park .Effect of Lubrication during Hot Rolling on the Evolution of Through-Thickness Textures in 18%Cr Ferritic Stainless Steel Sheet[J].Steel Research International,2008(6):489-496. |
| [8] | Huh M Y;Engler O .Effect of Intermediate Annealing on Texture,Formability and Ridging of 17% Cr Ferritic Stainless Steel Sheet[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2001,308(1-2):74. |
| [9] | Seung-Hyun HONG;Dong Nyung LEE .Recrystallization Textures in Cold-Rolled Ti Bearing IF Steel Sheets[J].ISIJ International,2002(11):1278-1287. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%