欢迎登录材料期刊网

材料期刊网

高级检索

利用XRD、SEM和DSC方法研究了AlFeCuCoNiCrTix(x=0、0.5、1)高熵合金退火态的微观组织、相结构以及相转变,同时利用洛氏硬度仪测量了各退火温度下的硬度变化.结果表明,随着退火温度的逐渐升高,TiO合金的相组成大约在636℃以后会逐渐由原来的fcc+bcc结构变为fcc1+fcc2+bcc结构,其硬度在636℃会略微增加,在636~1112℃之间下降明显,在1112℃以后基本维持不变;对于Ti0.5合金,退火时其相组成基本没有影响,一直保持fcc+bcc1+bcc2的结构,其硬度在607℃会略微增加,在607~1092℃之间下降明显,在1092℃以后基本维持不变;而对于Til舍金,当退火温度达到800℃时,会有Fe2Ti型的Laves相析出,这有助于提高材料的硬度,当退火温度达到1200℃时,其硬度可以提高到51.3HRC.

参考文献

[1] Yeh J W et al.Nanostructured high-entropy alloys with multiple principal elements:Novel alloy design concepts and outcomes[J].Advances in Engineering Materials,2004,6:299.
[2] Huang P K;Yeh J W;Shun T T et al.Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating[J].Advances in Engineering Materials,2004,6:74.
[3] Hsu C Y;Yeh J W;Chen S K et al.Wear resistance and high-temperature compression strength of FCC CuCoNiCrAl0.5 Fe alloy with boron addition[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2004,35:1465.
[4] Zhou Y J;Zhang Y;Wang F J et al.Effect of Cu addition on the microstructura and mechanical properties of AlCoCrFeNiTi0.5 solid-solution alloy[J].Journal of Alloys and Compounds,2008,466:201.
[5] 陈敏,刘源,李言祥,陈祥.多主元高熵合金AlTiFeNiCuCrx微观结构和力学性能[J].金属学报,2007(10):1020-1024.
[6] Cantor B;Chang I T H;Knight P .Microstructural development in equiatomie multicomponent alloys[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,375-377:213.
[7] Ranganthan S .Alloyed pleasures:multimetallic cocktails[J].Current Science,2003,85:1404.
[8] 刘源,李言祥,陈祥,陈敏.多主元高熵合金研究进展[J].材料导报,2006(04):4-6,14.
[9] 刘源;陈敏;李言祥.多主元高熵合金的组织和性能特点[A].河南郑州,2006:252.
[10] Tong C J;Chen Y L;Chen S K et al.Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with muhiprincipal elements[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2005,36:881.
[11] TongC J;Chen M R;Chen S K et al.Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with muhiprincipal elements[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2005,36:1263.
[12] Zhang Y;Wang X F;Chen G L .Effcet of Ti on the microstructure and properties of CoCrCuFeNiTix high-entropy alloys[J].Annales de Chimie Science des Materiaux,2006,31(06):699.
[13] 陆昌伟;奚同庚.热分析质谱分析[M].上海:上海科学技术文献出版社,2002:86.
[14] Zhou YJ;Zhang Y;Wang YL;Chen GL .Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties[J].Applied physics letters,2007(18):181904-1-181904-3-0.
[15] Wang X F;Zhang Y;Qiao Y .Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys[J].INTERMETALLICS,2007,15:357.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%