用质量损失法研究了65Mn和316L及其Ni-P镀层的冲刷腐蚀行为.结果表明:在试样表面与流体间相对运动距离相同的条件下,65Mn和316L在单相流和两相流中的冲刷腐蚀速率随着介质温度的升高和理论流速的减小而增大.在20%H2sO4单相流和20%H2S04+20 g/L黄砂两相流(50℃,L88 m/s)中,冲刷与腐蚀的交互作用引起的65Mn质量损失速率分别为80.35和127.21 g·m-2·h-1,而316L则分别为5.25和17.22 g·m-2·h-1.在两相流中,65Mn和316L的冲刷腐蚀机制分别为均匀腐蚀+轻微微切削和轻微选择性腐蚀+轻微塑性变形.Ni-P化学镀层町显著改善65Mn和316L的冲刷腐蚀性能,且温度和理论流速越高效果越显著.
参考文献
| [1] | ZHENG Yugui,YAO Zhiming,ZHANG Yusheng,WEI Xiangyun,KE Wei,Erosion-corrosion synergism and erosion-corrosion resistant alloy development,Acta Metall Sinica,36(1),51(2000)(郑玉贵,姚治铭,张玉生,魏翔云,柯伟,冲刷与腐蚀的交互作用与耐冲刷腐蚀合金设计,金属学报,36(1),51(2000)) |
| [2] | ZHANG Anfeng,XING Jiandong,BAO Chonggao,JIA Huanru,The effect of dynamic and static pure corrosion on quantitatively studying the interaction between erosion and corrosion of materials,Acta Metall Sinica,38(5),521(2002)(张安峰,邢建东,鲍崇高,贾焕如,动态与静态纯腐蚀对定量研究材料冲刷腐蚀交互作用的影响,金属学报,38(5),521(2002)) |
| [3] | ZHANG Anfeng,WANG Yuyue,XING Jiandong,LI Changjiu,Synergistic effects between erosion and corrosion of two coatings and two steels in two-phase flow,Acta Metall Sinica,40(4),411(2004)(张安峰,王豫跃,邢建东,李长久,两种涂层和两种钢在液/固两相流中冲刷与腐蚀的交互作用,金属学报,40(4),411(2004)) |
| [4] | WANG Zaiyou,ZHU Jinhua,WANG Zhangzhong,Analysis on perdominant factors characterizing erosion resistance of some ferrous alloys,Acta Metall Sinica,43(6),64S(2007)(王再友,朱金华,王章忠,铁基合金抗冲蚀性能主要控制因素的分析,金属学报,43(6),648(2007)) |
| [5] | LI Ming,LI Xiaogang,DU Cuiwei,CHENG Xuequn,Failure analysis on corrosion of PAT oxidation equipments,Corr Sci Protect Technol,17(4),282(2005)(李明,李晓刚,杜翠薇,程学群,PAT氧化设备腐蚀失效分析,腐蚀科学与防护技术,17(4),282(2005)) |
| [6] | JING Hemin,WU Xinqiang,ZHENG Yuyue,YAO Zhiming,KE Wei,Effect of Mo content on the corrosion and erosion-corrosion of stainless steel in oil containing naphthenic acid,Acta Metall Sinica,38(10),1067(2002)(敬和民,吴欣强,郑玉贵,姚治铭,柯伟,Mo含量对不锈钢在环烷酸介质中腐蚀与冲蚀的影响,金属学报,38(10),1067(2002)) |
| [7] | FANG Xinxian,BAI Yunqiang,WANG Zhangzhong,Erosion corrosion behaviour of J4 stainless steel and electroless plating coatings of Ni-P and Ni-Cu-P in liquid-solid two-phase flow,Acta Metall Sinica,46(2),239(2010)(方信贤,白允强,王章忠,J4不锈钢及化学镀Ni-P和Ni-Cu-P镀层在液一固两相流中的冲刷腐蚀行为,金属学报,46(2),239(2010)) |
| [8] | Jargelius-Petterson R F A,Pound B G,Examnation of the role of molybdenum in passivation of stainless steels using AC impedance spectroscopy,J Electrochem Soc,145(5),1462(1998) |
| [9] | Pardo A,Merino M C,Coy A E,Viejo F,Arrabal R,Matykina E,Effect of Mo and Mn additions on the corrosion behavior of AISI304 and 316L stainless steels in H2SO4,Corros Sci,50,780(2008) |
| [10] | Z.Guo,K.G.Keong,W.Sha,Crystallization and phase transformation behavior of electroless nickel phosphorus platings during continuous heating,J.Alloys Comp.,358,112(2003) |
| [11] | ZHAO Fangxia,LIU Chen,ZHANG Zhenzhong,QIU Tai,Comparative study of electroless plated Ni-P and Ni-Cu-P coatings,Mater Protect,39,65(2006)(赵芳霞,刘琛,张振忠,丘泰,Ni-P和Ni-Cu-P化学镀层对比研究,材料保护,39,65(2006)) |
| [12] | J.N.Balaraju,V.Ezhil Selvi,V.K.William Grips,K.S.Rajam,Electrochemical studies on electroless ternary and quaternary Ni-P based alloys,Eiectrochimeca Acta,52,1064(2006) |
| [13] | FANG Xinxian,Corrosion Resistance of electroless plated Ni-P and Ni-Cu-P coatings,Corr Sci Protect Technol,22(2),109(2010)(方信贤,化学镀Ni-P和Ni-Cu-P合金耐蚀性研究,腐蚀科学与防护技术,22(2),109(2010)) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%