欢迎登录材料期刊网

材料期刊网

高级检索

本文通过制备不同膜厚的纳米SnO2厚膜型气敏器件试样,测量试样对乙醇气体的灵敏度和试样的阻温曲线并进行复阻抗分析,研究了试样的膜厚对灵敏度的影响.SnO2纳米材料由化学沉淀法制备,采用平面丝网印刷技术制作不同膜厚的气敏试样.结果表明,试样膜厚在65μm左右对乙醇气体具有最大灵敏度.膜厚对灵敏度的影响可能与膜层的晶粒接触状态如接触面积、气孔率、气孔宽度和深度等发生变化有关.

The effects of film thickness on the gas-sensing properties of SnO2 thick film sensors were explored by
measuring the ethanol gas sensitivity, the variations in resistance with temperature and analyzing the complex impedance plots. The nanoparticles
were synthesized by chemical precipitation method and films were prepared by standard screen printing technology. The results showed that the sample
having 65μm thickness gave the maximum sensitivity. Changes in sensitivity with thickness might be caused by changes in the state of films, such as the
number and the width and depth of the pores.

参考文献

[1] Klober J, Ludwig M, Schneider H A. Sensors and Aactuators, 1991, B3: 69--76.
[2] Menil F, Lucat C, Debeda H. Sensors and Aactuators, 1995, B24-25: 415--423.
[3] 康昌鹤, 唐省吾. 气湿敏感器件及其应用. 北京: 科学出版社, 1988. 29--33.
[4] 林光明, 杨华, 周歧发, 张进修. 传感技术学报, 1993, 1: 50--56.
[5] 何芳钧, 韩吉胜. 硅酸盐学报, 1992, 2: 201--206.
[6] Anisur Rahman K M, Schneider S C, Seitz M A. J. Am. Ceram. Soc., 1997, 80 (5): 1198--1203.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%