{100}织构因具有两个易磁化方向能够明显的提高磁性能,因此如何在表面获得具有{i00}织构一直是无取向电工钢研究焦点.本文主要介绍了获得{100}织构的主要工艺方法及其基本原理,并结合实际生产过程对各工艺方法的优缺点进行了分析;一方面,优化无取向电工钢的成分,降低碳、锰元素含量以避免脱碳退火和真空退火,简化生产工艺;另一方面,调节升温速度、降温速度和退火气氛,使{100}晶面的表面能或弹性应变能最低,制备具有{100}织构柱状晶组织的无取向电工钢是今后的发展方向.
参考文献
| [1] | Sixtus K J .Magnetic anisotropy in silicon stcel[J].Physica,1935,6:105-111. |
| [2] | Assmus F;Bull R;Ganz D et al.On iron-silicon with cube texture,Ⅰ-magnetic investigation[J].ZEITSCHRIFT FUR METALLKUNDE,1957,48:341-343. |
| [3] | Walter J L;Hibbard W;Fiedler H C et al.Magnetic properties of cube textured silicon-iron magnetic sheet[J].Journal of Applied Physics,1958,29(03):363-365. |
| [4] | Wiener G;Albert P A;Trapp R H et al.Cube texture in body centered magnetic alloys[J].Journal of Applied Physics,1958,29(03):366-367. |
| [5] | Pry R H .Development of metallurgical structures and magnetic properties in iron silicon alloys[J].Journal of Applied Physics,1959,30(04):189S-193S. |
| [6] | Foster K;Kramer J J .Effect of directional orientation on the magnetic properties of cube-oriented magnetic sheets[J].Journal of Applied Physics,1960,31(05):233S-234S. |
| [7] | Foster K .Effect of composition on growth rates of secondary {100 } grains in Si-Fe sheets[J].Journal of Applied Physics,1966,37(03):1206-1207. |
| [8] | Clogston A M .Role of magnetism in technology[J].Journal of Applied Physics,1969,40(03):917-928. |
| [9] | Elban W L;Hebbar M A;Kramer J J .Adsorption,surface energy and crystal growth in iron-3 Pct silicon[J].Metallurgical Transactions,1975,6A:1929-1937. |
| [10] | Kohler D .Promotion of cubic grain growth in 3% silicon iron by control of annealing atmosphere composition[J].Journal of Applied Physicss,1960,31(05):408S-409S. |
| [11] | T. Tomida .A New Process to Develop (100) Texture in Silicon Steel Sheets[J].Journal of Materials Engineering and Performance,1996(3):316-322. |
| [12] | Tomida T;Tanak T .Development of (100) texture in silicon steel sheets by removal of manganese and decarburization[J].ISIJ International,1995,35(05):548-556. |
| [13] | Tomida T. .(100)-TEXTURED 3-PERCENT SILICON STEEL SHEETS BY MANGANESE REMOVAL AND DECARBURIZATION[J].Journal of Applied Physics,1996(8 Pt.2a):5443-5445. |
| [14] | 毛卫民,吴勇,余永宁,冯惠平.新型冷轧双取向硅钢组织与织构的形成机理[J].钢铁,2002(08):53-57. |
| [15] | Toshiro Tomida .Decarburization of 3%Si-1.1%Mn-0.05%C steel sheets by silicon dioxide and development of {100}(012) texture[J].Materials transactions,2003(6):1096-1105. |
| [16] | T. Tomida;S. Uenoya .Cube oriented 3%Si-1%Mn soft magnetic steel sheets with fine grain structure[J].IEEE Transactions on Magnetics,2001(4 Pt.1):2318-2320. |
| [17] | T. Tomida;N. Sano;K. Ueda .Cube-textured Si-steel sheets by oxide-separator-induced decarburization and growth mechanism of cube grains[J].Journal of Magnetism and Magnetic Materials,2003(0):315-317. |
| [18] | Aspden R G;Berger J A;Trout H E .Anisotropic and heterogeneous nucleation during the gamma to alpha transformation in iron[J].ACTA METALLURGICA,1968,16(08):1027-1035. |
| [19] | F. Kovac;M. Dzubinsky;Y. Sidor .Columnar grain growth in non-oriented electrical steels[J].Journal of Magnetism and Magnetic Materials,2004(3):333-340. |
| [20] | Hashimoto O;Satoh S;Tanaka T .Formation of α→γ→α transformation texturein sheet steel[J].Transactions ISIJ,1983,23:1028-1037. |
| [21] | Jin Kyung SUNG;Dong Nyung LEE;Duck Hyun WANG .Efficient Generation of Cube-on-Face Crystallographic Texture in Iron and its Alloys[J].ISIJ International,2011(2):284-290. |
| [22] | Jin Kyung Sung;Se Min Park;Byoung Yul Shim .Effect of Mn on <100> Texture Evolution in Fe-Si-Mn Alloys[J].Materials Science Forum,2012(Pt.2):730-733. |
| [23] | Takashima M.;Morito N.;Komatsubara M. .(001)(210) TEXTURE DEVELOPMENT BY TWO-STAGE COLD ROLLING METHOD IN NON-ORIENTED ELECTRICAL STEEL[J].ISIJ International,1997(12):1263-1268. |
| [24] | Bellier S P;Doherty R D .The structure of deformed aluminium and its recrystallization-investigations with transmission Kossel diffraction[J].ACTA METALLURGICA,1977,25(04):521-538. |
| [25] | Kestens L;Jonas J J.Transformation and recrystal-lization textures associated with steel processing[A].USA,2005:685-700. |
| [26] | Kestens L;Jacobs S.Texture,Stress,and Microstructure[M].USA:Hindawi Publishing Corporation,2008:1-9. |
| [27] | F.J.G. Landgraf;T. Yonamine;R. Takanohashi .Magnetic properties of silicon steel with as-cast columnar structure[J].Journal of Magnetism and Magnetic Materials,2003(0):364-366. |
| [28] | 张元祥,许云波,刘振宇,王国栋.双辊薄带连铸对无取向硅钢织构和磁性能的影响[J].材料热处理学报,2012(08):64-68. |
| [29] | 肖丽俊,岳尔斌,仇圣桃,干勇.双辊薄带连铸生产取向硅钢的技术分析[J].钢铁研究学报,2009(08):1-4,40. |
| [30] | 张宁,杨平,毛卫民.柱状晶对Fe-3％Si电工钢再结晶织构演变规律的影响[J].金属学报,2012(03):307-314. |
| [31] | 张宁,杨平,毛卫民.柱状晶对Fe-3％Si电工钢冷轧织构演变规律的影响[J].金属学报,2012(07):782-788. |
| [32] | L. Cheng;N. Zhang;P. Yang .Retaining {100} texture from initial columnar grains in electrical steels[J].Scripta materialia,2012(11):899-902. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%