利用硬度检测和透射电镜观察研究含θ″析出相的Al-Cu合金在不同加工温度下多向压缩(MAC)变形后的组织。结果表明：温度大于60℃的加工能显著提高合金的加工性能；经60℃和70℃加工获得的亚晶组织稳定；而经100℃加工过程形成的细小亚晶出现合并长大现象。MAC加工15道次获得的组织分布极其不均匀，这种不均匀性与 MAC 变形方式密切相关；当加工道次提高到35次时，细晶组织基本分布均匀。对比分析表明试样经60℃MAC加工35道次后的组织状态最为理想。
Al-Cu alloy containingθ″precipitated phase was processed by multi-axial compression (MAC) deformation at various temperatures. The organization evolution was investigated by transmission electron microscopy and vickers hardness tester. The results show that the processing properties of the alloy can be significantly improved with processing temperature rising to 60 ℃. The subgrains obtained during processing at 60 and 70 ℃ are stable, and grow up as the temperature rising to 100℃. The uneven distribution of the microstructures of Al-Cu alloy processed by MAC with 15 passes is associated with the deformation pattern of MAC. This can be resolved through the increase of steps to 35 passes. Comparing microstructures of the different processing states, which shows that the microstructures processed during 60℃with 35 passes is optimal.
参考文献
| [1] | Q.J. Wang;Z.Z. Du;L. Luo.Fatigue properties of ultra-fine grain Cu-Cr alloy processed by equal-channel angular pressing[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2012:39-44. |
| [2] | Taekyung Lee;Motomichi Koyama;Kaneaki Tsuzaki;You-Hwan Lee;Chong Soo Lee.Tensile deformation behavior of Fe-Mn-C TWIP steel with ultrafine elongated grain structure[J].Materials Letters,2012:169-171. |
| [3] | LANGDON T G .The characteristics of grain refinement in materials processed by severe plastic deformation[J].REVIEWS ON ADVANCED MATERIALS SCIENCE,2006,13:6-14. |
| [4] | J. Cizek;I. Prochazka;B. Smola;I. Stulikova;R. Kuzel;Z. Matej;V. Cherkaska;R.K. Islamgaliev;O. Kulyasova .Microstructure and thermal stability of ultra fine grained Mg-based alloys prepared by high-pressure torsion[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1-2):121-126. |
| [5] | H. Paul;T. Baudin;K. Kudlacz.Recrystallization in ultra-fine grain structures of AA3104 alloy processed by ECAP and HPT[J].Materials Science Forum,2012:346-353. |
| [6] | PADAP A K;CHAUDHARI G P;NATH S K .Ultrafine-grained HSLA steel processed using MAF:Dry sliding wear and corrosion behavior[J].Materials Science Forum,2012,710:276-281. |
| [7] | CHERUKURI B;SRINIVASAN R .Properties of AA6061 processed by multi-axial compression/forging(MAC/F)[J].Materials and Manufacturing Processes,2006,21(05):519-525. |
| [8] | Ruslan Z. Valiev;Terence G. Langdon .Principles of equal-channel angular pressing as a processing tool for grain refinement[J].Progress in materials science,2006(7):881-981. |
| [9] | A. Kundu;R. Kapoor;R. Tewari .Severe plastic deformation of copper using multiple compression in a channel die[J].Scripta materialia,2008(3):235-238. |
| [10] | LIU Zhi-yi;CHEN Xu .The dissolution behavior of phase in Al-Cu binary alloy during equal channel angular pressing and multi-axial compression[J].Materials Science and Engineering A,2010,527:4300-4305. |
| [11] | 余永宁.材料科学基础[M].北京:高等教育出版社,2006 |
| [12] | 张孜昭,许晓嫦,刘志义,夏卿坤,曾苏民.强变形诱导形成的Al-Cu合金过饱和固溶体在继续变形时的再析出行为[J].中国有色金属学报,2009(11):1962-1968. |
| [13] | Segal VM. .Severe plastic deformation: simple shear versus pure shear[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):331-344. |
| [14] | HANSEN N .Cold deformation microstructures[J].Materials Science and Technology,1990,6:1039-1047. |
| [15] | HARREN S V;DEVE H E;ASARO R J .Shear band formation in plane strain compression[J].Acta Metal,1988,36(09):2435-2480. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%