考虑金属裂纹板复合材料单面胶接修补结构的几何非线性和边界条件,建立了考虑弯曲变形单面修补结构力学分析模型,计算出承受面内载荷时修补结构的弯矩和挠度,将补片自由端和金属板裂纹处的弯矩作为胶层应力控制微分方程的边界条件,推导出剪应力和剥离应力的解析解,及裂纹张开位移的表达式,并与有限元数值结果进行对比.分析结果表明,胶接修补结构应力分析理论模型和相关简化假设合理、正确.利用所建立的解析模型研究了金属裂纹复合材料单面胶接修补结构的应力分布特点及胶层主导破坏模式的失效机制,为胶接修补结构的承载能力分析以及结构改进设计提供了一定的理论依据.
参考文献
| [1] | Baker A A.Repair of cracked or defective metallic aircraft components with advanced fiber composites[J].Composite Structure,1984,2(2):153-181.,1984. |
| [2] | Wang C H,Rose L R F.A crack bridging model for bonded plates subjected to tension and bending[J].International Journal of Solids and Structure,1999,36(13):1985-2014.,1999. |
| [3] | 朱书华,王跃全,童明波.复合材料层合板阶梯形挖补胶接修理渐进损伤分析[J].复合材料学报,2012(06):164-169. |
| [4] | Rose L R F.An application of the inclusion analogy for bond ed reinforcement[J].International Journal of Solids and Structures,1981,17(8):827-838.,1981. |
| [5] | Rose L R F.A cracked plate repaired by bonded reinforce ments[J].International Journal of Fracture,1982,18(2):135-144.,1982. |
| [6] | 黄旭仁,胡芳友,赵培仲.加载速率对复合材料粘接修理金属结构力学性能的影响[J].复合材料学报,2013(02):220-225. |
| [7] | 关志东,Yang Chihdar.复合材料管接头拉扭作用下胶层应力分析[J].复合材料学报,2004,21(3):96-101.Guan Zhidong,Yang Chihdar.Analysis of the stress in a composite pipe joint under tensile and torsional loads[J].Ac ta MateriaeCompositaeSinica,2004,21(3):96-101.,2004. |
| [8] | Hart Smith L J.Adhesive bonded single lap joints,NASA/CR 1973 112236[R].Washington,D.C.:NASA,1973.,1973. |
| [9] | 赵波.考虑弯曲效应的混元胶接单搭接头应力模型[J].机械工程学报,2008(10):129-137. |
| [10] | Jones R,Callian R J,Aggarwal K C.Analysis of bonded re pair to damaged fiber composite structures[J].Engineering Fracture Mechanics,1983,17(1):37-46.,1983. |
| [11] | Sun C T,Klug J,Arendt C.Analysis of cracked aluminum plates repaired with bonded composite patches[J].AIAA Journal,1996,34(2):3143-3151.,1996. |
| [12] | Naboulsi S,Mall S.Modeling of cracked metallic structure with bonded composite patch using three layer technique[J].Composite Structure,1996,35(3):295-308.,1996. |
| [13] | 孙洪涛,刘元镛.改进的金属裂纹板复合材料胶接修补的有限元模型[J].西北工业大学学报,2000(03):446-451. |
| [14] | Tsai M Y,Oplinger D W,Morton J.Improved theoretical solutions for adhesive lap joints[J].International Journal of Solids and Structures,1998,35(12):1163-1185.,1998. |
| [15] | 徐建新,张开达.复合材料补片止裂性能的方法研究[J].工程力学,1999,16(2):93-98.Xu Jianxin,Zhang Kaida.Study on the method of fatigue re sistance with composite patches[J].Engineering Mechanics,1999,16(2):93-98.,1999. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%