用机械合金化法制备A165Fe25Ni10纳米合金粉末.采用X射线衍射(XRD)、振动样品磁强计(VSM)研究了其结构和磁性随球磨时间的演变.结果表明:在球磨初期,粉末晶粒尺寸急剧减小,内应变迅速增大:球磨50 h后晶粒尺寸、内应变基本保持稳定.矫顽力(Hc)随球磨时间的增加先增大,球磨50 h后急剧减小.在晶粒尺寸较小时,矫顽力与晶粒尺寸的六次方成正比;晶粒尺寸较大时,矫顽力与晶粒尺寸成反比.
参考文献
| [1] | Yoshizawa Y;Oguma S;Yamauchi K .[J].Journal of Applied Physics,1988,64(10):6044. |
| [2] | Yoshizawa Y;Yamauchi K;Yamane T et al.[J].Journal of Applied Physics,1988,64(10):6047. |
| [3] | Yong Zou;Kiyoshi Kusabiraki;Shigeoki Saji .Effect of Ni addition on formation of amorphous and nanocrystalline phase during mechanical alloying of Al-25 at.%Fe-(5,10) at.%Ni powders[J].Materials Research Bulletin: An International Journal Reporting Research on Crystal Growth and Materials Preparation and Characterization,2002(7):1307-1313. |
| [4] | 周文政,欧阳义芳,覃善华,钟夏平,吴伟明.Al1-xFex混合粉末的机械合金化[J].广西大学学报(自然科学版),2004(02):101-104. |
| [5] | Herzer G. .Grain size dependence of coercivity and permeability in nanocrystalline ferromagnets[J].IEEE Transactions on Magnetics,1990(5):1397-1402. |
| [6] | Herzer G .[J].Scripta Metallurgica et Materialia,1995,33(05):1741. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%