为了高效加工出三维整体高翅片强化传热管,提出采用多刀刨削加工三维整体高翅片强化传热管的制造方法--利用在基管上同时刨削出多片不脱离工件的、不发生卷曲的"切屑"作为三维整体高翅片强化传热管的翅片.研究刀具前角、切削厚度对切屑卷曲的影响,初步探讨翅片刨削成形即切屑不卷曲的机理.结果表明,切屑不卷曲的条件是当刀具前角为60°或55°时,切削厚度在0.15～0.25 mm之间,或者前角为50°,切削厚度在0.1～0.2mm之间时,切屑不发生卷曲;切屑不卷曲的机理在于切屑根部没有发生明显的剪切变形.
参考文献
| [1] | 潘文厚,杨启明.管壳式换热器节能技术研究[J].现代化工,2007(10):50-53. |
| [2] | ARTHUR E. BERGLES .Enhanced Heat Transfer: Endless Frontier, or Mature and Routine?[J].Journal of enhanced heat transfer: Theory and application in high performance heat and mass transfer,1999(2/4):79-88. |
| [3] | 李敏孝.螺纹管冷轧工艺的研究和发展[J].石油化工设备,2007(02):59-62. |
| [4] | 罗鹏,朱诚实,赵文华.波纹强化传热管的无模液压成型[J].沈阳化工学院学报,1996(04):300. |
| [5] | 王必武,杨子谦,施广森.高效节能翅片管的加工、应用及发展趋势[J].水利电力机械,2002(01):16-18. |
| [6] | 翅片管轧制工艺润滑剂性能特征与配方模式[J].中国有色金属学报,1999(01):197. |
| [7] | 袁启龙,李言,肖继明,朱江新,李鹏阳.切削-挤压复合成形技术[J].中国有色金属学报,2005(06):860-864. |
| [8] | 夏伟,吴斌,汤勇,李元元.整体翅片管的劈切-挤压加工[J].中国有色金属学报,2001(01):27-30. |
| [9] | A.E.Bergles .The implications and challenges of enhanced heat transfer for the chemical process industries[J].Chemical Engineering Research & Design: Transactions of the Institution of Chemical Engineers,2001(A4):437-444. |
| [10] | 方江敏,马小明,李华,钱颂文.Sunrod针翅管的优化与强化传热性能研究[J].石油化工设备,2002(04):10-13. |
| [11] | N. Sahiti;F. Durst;A. Dewan .Heat transfer enhancement by pin elements[J].International Journal of Heat and Mass Transfer,2005(23/24):4738-4747. |
| [12] | 杨传健,江楠,廖晓懿.新型高效强化传热元件--钉翅管的传热性能[J].石油化工设备,2007(02):15-17. |
| [13] | Zhang ZG;Yu ZS;Fang XM .An experimental heat transfer study for helically flowing outside petal-shaped finned tubes with different geometrical parameters[J].Applied thermal engineering: Design, processes, equipment, economics,2007(26):268-272. |
| [14] | 王真勇,张正国,方晓明.三维肋翅片管在螺旋折流板换热器中的应用研究[J].化学工程与装备,2008(05):44-48. |
| [15] | TANG Yong,XIA Wei,LIU Shu-dao,ZENG Zhi-xin,YE Bang-yan.Fin formation model during pre-roll ploughing of |
| [16] | 万珍平,燕辉,葛子平,汤勇.三维整体外翅片管滚压-犁切/挤压成形工艺[J].中国机械工程,2009(19):2368-2371. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%