为确定S2玻璃纤维/环氧树脂(S2-Glass/Epoxy)叠层复合材料面内剪切应力-应变关系,对S2-Glass/Epoxy叠层复合材料面内剪切拉伸载荷下的弹、塑性连续损伤本构模型及应用进行了研究.基于平面应力状态下的连续损伤力学模型,通过典型面内剪切拉伸实验,分别建立了忽略塑性应变和考虑塑性应变的两种连续损伤力学(CDM)模型,并确定相关参数.通过ABAQUS/Explicit用户子程序VUMAT接口,分别采用两种CDM模型对S2-Glass/Epoxy叠层复合材料面内剪切拉伸实验进行有限元数值计算,与实验结果对比,验证模型可靠性,并分析单元类型对有限元计算结果的影响.研究结果表明:忽略塑性应变的CDM模型可以很好地预测复合材料面内剪切失效强度,但不能较好地预测其非线性力学响应;考虑塑性应变,将塑性硬化与损伤耦合后的CDM模型则能较好的预测复合材料非线性力学响应和面内剪切失效强度;该平面应力状态下建立的CDM模型可用于壳单元进行复合材料有限元数值计算,横向剪切作用导致传统壳单元数值计算的载荷位移曲线略低于平面应力单元计算结果;减缩积分算法有利于提高有限元数值计算结果的准确性.
参考文献
| [1] | Woerden H J M,Sinke J,Hooijmeijer P A.Maintenance of glare structures and glare[J].Applied Composite Materials,2003,10(4/5):307-329. |
| [2] | Sadighi M,P(a)rn(a)nen T,Alderliesten R C,Sayeaftabi M,Benedictus R.Experimental and numerical investigation of metal type and thickness effects on the impact resistance of fiber metal laminates[J].Appl Compos Mater,2012,19(3/4):545-559. |
| [3] | 朱炜垚,许希武.复合材料层合板低速冲击损伤的有限元模拟[J].复合材料学报,2010,27(6):200-207.Zhu Weiyao,Xu Xiwu.Finite element simulation of low velocity impact damage on composite laminates[J].Acta Materiae Compositae Sinica,2010,27(6):200-207. |
| [4] | Mccarthy C T,Mccarthy M A,Lawlor V P.Progressive damage analysis of multi-bolt composite joints with variable bolt-hole clearance[J].Composites:Part B,2005,36(4):290-305. |
| [5] | Maa R H,Cheng J H.A CDM-based failure model for predicting strength of notched composite laminates[J].Composites:Part B,2002,33(6):479-489. |
| [6] | Maim(i) P,Camanho P P,Mayugo J A,Vila C G D.A continuum damage model for composite laminates Part Ⅰ:Constitutive model[J].Meeh Mater,2007,39:897-908. |
| [7] | Maire J F,Chaboche J L.A new formulation of continuum damage mechanics (CDM) for composite materials[J].Aero Sci Tech,1997,1(4):247-257. |
| [8] | Allix O,Ladeveze P.Interlaminar surface modelling for the prediction of delamination[J].Composite Structure,1992,22:235-242. |
| [9] | Ladeveze P,Dantec E L.Damage modelling of the elementary ply for laminated composites[J].Composites Science and Technology,1992,43:257-267. |
| [10] | Phillips E A,Herakovich C T,Graham L L.Damage development in composites with large stress gradients[J].Composite Science Technology,2001,61:2169-2182. |
| [11] | Mccarthy M A,Xiao J R,Petrinic N,Kamoulakos A,Melito V.Modelling of bird strike on an aircraft wing leading edge made from fiber metal laminates Ⅰ:Material modelling[J].Applied Composite Materials,2004,11:295-315. |
| [12] | Thiruppukuzhi S V,Sun C T.Models for the strain-ratedependent behavior of polymer composites[J].Composites Science and Technology,2001,61:1-12. |
| [13] | Linde P,Middendorf P,Broucke B V D,Boer H D.Numerical simulation of damage behaviour of textile reinforced composites in aircraft structures[C]//27th International Congress of the Aeronautical Sciences.Dallas:ICAS,2010. |
| [14] | Laliberté J,Poon C.Numerical modelling of low velocity impact damage in fibre metal laminates[C]//23th International Congress of the Aeronautical Sciences.Tornoto,Canada:ICAS,2002. |
| [15] | Xiao X.A coupled damage plasticity model for energy absorption in composite[J].International Journal of Damage Mechanics,2010,19(6):727-751. |
| [16] | O' Higgins R M,Mccarthy C T,McCarthy M A.Identification of damage and plasticity parameters for continuum damage mechanics modelling of carbon and glass fibre-reinforced composite materials[J].Strain,2011,47(1):105-115. |
| [17] | 张 彦.纤维增强复合材料层合结构冲击损伤预测研究[D].上海:上海交通大学,2007.Zhang Yan.Study on impact damage prediction in fiber reinforced composite laminated structures[D].Shanghai:Shanghai Jiaotong University,2007. |
| [18] | ASTM D3518/D3518 M-94 Standard test method for inplane shear response of polymer matrix composite materials by tensile test of a ±45 laminate[S].USA:ASTM,2001. |
| [19] | ASTM Standard D3039/D3039 M-00 Standard test method for tensile proper ties of polymer rmatrix composite[S].USA:ASTM,2000. |
| [20] | Hill R.The mathematical theory of plasticity[M].London:Oxford University Press,1950. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%