在1100-1230℃的温度下真空烧结表面涂覆一层由聚乙烯醇粘结剂、合金粉末和分散剂构成的浆料的聚苯乙烯球制得高孔隙率的INCO-617合金空心球颗粒,对不同烧结工艺下制备的空心球颗粒的显微组织和力学性能进行了研究.结果表明,INCO-617合金空心球颗粒的密度随烧结温度的升高和烧结时间的延长而增加,其密度值在1.504～2.113 g/cm3之间.烧结温度的升高和烧结时间的延长可以明显减少球壁的残余孔隙,这是空心球颗粒显微硬度和压缩性能提高的主要原因,并且,随着球壁内残余孔隙的降低,空心球颗粒压缩时脆性破坏的倾向被抑制.
参考文献
| [1] | Banhart J .[J].Progress in Materials Science,2001,46:559. |
| [2] | 刘培生.多孔材料引论[M].北京:清华大学出版社,2003 |
| [3] | Gasser S;Paun F;Riffard L et al.[J].Scripta Materialia,2004,50:401. |
| [4] | Karagiozova D;Yu T X;Gao Z Y .[J].International Journal of Mechanical Sciences,2006,48:1273. |
| [5] | Sanders WS.;Gibson LJ. .Mechanics of hollow sphere foams[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):70-85. |
| [6] | Lim T J;Smith B;Mcdowell D L .[J].Acta Materialia,2002,50:2867. |
| [7] | Sanders WS.;Gibson LJ. .Mechanics of BCC and FCC hollow-sphere foams[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):150-161. |
| [8] | Wagg U;Schneider L;Lothman P et al.[J].Metal Powder Report,2000,55(01):29. |
| [9] | Orinakova R;Orinak A;Arlinghaus HF;Hellweg S;Kupkova M;Kabatova M .Study of coating distribution onto metallic hollow particles[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2006(19):7030-7033. |
| [10] | Banhart J.;Baumeister J. .Deformation characteristics of metal foams[J].Journal of Materials Science,1998(6):1431-1440. |
| [11] | 曹晓卿,杨桂通.热处理对泡沫铝合金力学性能及吸能性的影响[J].稀有金属材料与工程,2006(07):1121-1125. |
| [12] | 冶军.美国镍基高温合金[M].北京:科学出版社,1978:222. |
| [13] | Khor KA.;Yu LG.;Andersen O.;Stephani G. .Effect of spark plasma sintering (SPS) on the microstructure and mechanical properties of randomly packed hollow sphere (RHS) cell wall[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):130-135. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%