研究了挤压工艺参数(挤压温度、挤压比)对Mg-Sr-Y中间合金组织和性能的影响。结果表明:Mg-Sr-Y中间合金的铸态组织是由树枝晶状的基体相α-Mg、沿晶分布的网状共晶组织(Mg17Sr2+Mg25Y4)组成;热挤压后合金的晶粒明显细化,树枝晶和网状组织被打碎,晶粒大小和合金中析出相的分布更均匀。同时挤压后合金的硬度显著提高,力学性能明显改善,形变强化效果较为显著,其强化效果与挤压温度和挤压比有关。挤压温度越高,挤压比越大,则强化效果越显著。
Effects of extrusion process parameters (extrusion temperature, extrusion ratio) on microstrueture and performance of Mg-Sr-Y alloy were studied. The results indicate that the as-cast microstructure of Mg-Sr-Y alloy is composed of dendritic matrix phase α-Mg and network eutectic (Mg17Sr2 , Mg25Y4) distributed along grain boundaries. After hot extrusion, the alloy grains are refined significantly, the network autectic and dendrite structure is broken up, and grain size and distribution of the second phase of alloy are more uniform. Meanwhile, hardness of the alloy significantly increases, and the mechanical properties are improved obviously due to strain hardening effect. The effect of strengthening depends on extrusion temperature and extrusion ratio. The higher the extrusion temperature and the larger extrusion ratio, the strengthening effect is more significant.
参考文献
[1] | 陈刚,彭晓东,范培耕,谢卫东,魏群义,马宏,杨艳.Sr和Y对AZ31镁合金组织与耐蚀性能的影响[J].中国有色金属学报(英文版),2011(04):725-731. |
[2] | M.S. Dargusch;S.M. Zhu;J.F. Nie .Microstructural analysis of the improved creep resistance of a die-cast magnesium-aluminium-rare earth alloy by strontium additions[J].Scripta materialia,2009(2):116-119. |
[3] | 陈刚,彭晓东,刘相果,周书才.镁锶合金的制备及其应用[J].中国铸造装备与技术,2005(06):7-9. |
[4] | Wang X M;Zeng X Q;Zhou Y et al.Early oxidation behaviors of Mg-Y alloys at high temperatures [J l ~[J].Journal of Alloys and Compounds,2008,460(I-2):368-374. |
[5] | 张清,李全安,井晓天,张兴渊.Mg-10Y-1.5Sm合金的组织和力学性能[J].材料热处理学报,2011(01):24-27. |
[6] | 曹凤红,龙思远,杜勇,张广俊.AZ61镁合金挤锻复合成形组织与力学性能[J].材料热处理学报,2009(05):154-157. |
[7] | 尹维,刘喜明.Mg-Mn-RE合金挤压和锻造变形后的组织与力学性能[J].材料热处理学报,2011(01):34-37. |
[8] | 张利军,张宝红,张治民,王静.挤压比对AZ80镁合金组织及性能的影响[J].热加工工艺,2010(08):10-11,14. |
[9] | 梁书锦,王欣,刘祖岩,王尔德.AZ31镁合金不同温度挤压后组织性能研究[J].稀有金属材料与工程,2009(07):1276-1279. |
[10] | 徐绍勇,龙思远,廖慧敏,曹凤红.应变速率对AZ31挤压变形镁合金力学行为的影响[J].材料热处理学报,2010(05):44-48. |
[11] | CHENG Ren-ju,潘复生,YANG Ming-bo,汤爱涛.不同状态Mg-9Sr中间合金对AZ31镁合金铸态组织的影响[J].中国有色金属学报,2008(07):1178-1184. |
[12] | Cheng Ren-ju;Tang Ai-tao;YANG Ming-bo et al.Effects of AI-Sr master alloys on the as-cast microstructure of the AZ31 magnesium alloys[J].Materials Science Forum,2007,546-549:183-186. |
[13] | Mingbo Yang;Fusheng Pan;Renju Cheng .Effect of Mg-10Sr master alloy on grain refinement of AZ31 magnesium alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):440-445. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%