Nucleation sites of α-Al grains after addition of an Al-Ti-B master alloy into pure aluminium have been investigated using EPMA. The results show that either TiAl3 or boride particales can nucleate α-Al grains. But the number of TiAl3 nucleants is reduced with the holding time prolonged and the boride-nuclei are increasing gradually. Based on these results, a new refining method, adding molten Al-Ti-B into commercially pure aluminium, which has a quicker and better refining efficiency is presented.
参考文献
[1] |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%