研究固溶温度、时效温度以及多重时效处理对Ti-24Al-15Nb-1Mo合金热轧板材拉伸性能的影响,对不同热处理工艺下板材的微观组织和拉伸断口形貌进行观察.结果表明:当固溶处理温度从990 ℃升高到1 010 ℃时,Ti-24Al-15Nb-1Mo合金热轧板材的室、高温强度均有所提高,塑性略有降低;当时效温度从815 ℃升高到850 ℃时,板材的室温和高温强度降低,塑性变化不明显;Ti-24Al-15Nb-1Mo合金热轧板材经990 ℃固溶处理后再进行多次时效处理,其拉伸性能变化不明显;增加时效次数,拉伸强度略微降低.
参考文献
| [1] | BANERJEE D;GOGIA A K;NANDY T K .A new phase in Ti3Al based alloy with high content of niobium[J].Acta Metallurgica Et Materialia,1988,36:871-882. |
| [2] | Wu YT.;Yang CT.;Koo CH.;Singh AK. .A study of texture and temperature dependence of mechanical properties in hot rolled Ti-25Al-xNb alloys[J].Materials Chemistry and Physics,2003(1):339-347. |
| [3] | S. SVWAS;R. K. RAY .STABILITY OF ROLLING TEXTURE DURING HEAT TREATMENT IN A TWO-PHASE Ti3Al BASE INTERMETALLIC ALLOY[J].Acta materialia,1999(18):4599-4614. |
| [4] | BANERJEE D;BALIGIDAD R G;GOGIA A K.Engineering multiphase intermetallics[A].Warrendale,PA,USA,2001:43-47. |
| [5] | James C. Williams;Edgar A. Starke Jr. .Progress in structural materials for aerospace systems[J].Acta materialia,2003(19):5775-5799. |
| [6] | ROWE R G .Tri-titanium aluminide alloys containing at least eighteen atom percent niobium[P].US 5032357,1991. |
| [7] | 张建伟;程云君;梁晓波;李世琼.(α2+B2+O)三相区温度变形的Ti3Al基合金板材组织和性能[J].稀有金属材料与工程,2008(Supple 3):561-564. |
| [8] | 曹京霞;孙育峰;曹春晓;全旭 .Ti3Al-Nb-Mo-(Si)合金的显微组织与力学性能[J].稀有金属,1997,21(01):490-493. |
| [9] | CAO Jing-xia;BAI Fang;LI Zhen-xi .High temperature low cycle fatigue behavior of titanium aluminide Ti-24Al-15Nb-1Mo alloy[J].Materials Science and Engineering A,2006,424:47-49. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%