利用Gleeble-3800热/力模拟试验机,研究了1种低碳微合金钢的形变奥氏体连续冷却转变行为以及终轧温度、终轧变形量对相变组织形态的影响。结果表明,实验钢在研究的冷速范围内均可得到一定量的贝氏体组织。随着冷速的增加,冷速达到50℃/s时,贝氏体组织由粒状贝氏体逐渐过渡到板条状贝氏体。在较快的冷速下,随终轧温度的降低或终轧变形量的减小,贝氏体转变开始与结束温度均降低,获得的贝氏体具有不同的组织形态。
Continuous cooling phase transformation of deformed austenite in a low carbon microalloyed steel and effects of temperature and reduction at the final compression on the microstructure are studied by using Gleeble-3800 thermo-mechanical simulator. The results show that bainite can be obtained at any cooling rate studied. With the cooling rate increasing, the microstructure is transformed from grain bainite to lath bainite. The transformation temperature of bainite is influenced by the temperature and reduction in the final pass compression, and the bainite with different pattern is observed.
参考文献
| [1] | 王克鲁,鲁世强,康永林,陈庆军.微合金低碳贝氏体钢形变奥氏体连续冷却转变行为[J].金属热处理,2008(10):17-19. |
| [2] | 王春明,吴杏芳,刘玠,黄国建,李桂艳.X70管线钢控轧控冷工艺与组织性能的关系[J].钢铁,2005(03):70-74. |
| [3] | 王邵东;曲锦波;王国栋 等.10MnMoNiNb钢形变奥氏体连续冷却相变规律和显微组织[J].钢铁研究学报,1999,11(01):37-40. |
| [4] | 崔忠圻.金属学与热处理[M].北京:机械工业出版社,1998:270-276. |
| [5] | Dutta B;Palmiere E J;Sellars C M .Modelling the kinetics of strain induced precipitation in Nb micro,alloyed steels[J].Acta Materialia,2001,49:785. |
| [6] | 尚成嘉,杨善武,王学敏,侯华兴,于功利,王文仲.低碳贝氏体钢的组织类型及其对性能的影响[J].钢铁,2005(04):57-61. |
| [7] | 徐平光,方鸿生,白秉哲,杨志刚.仿晶界型铁素体/粒状贝氏体复相组织的韧性[J].金属学报,2002(03):255-260. |
| [8] | 方鸿生,刘东雨,徐平光,白秉哲,杨志刚.贝氏体钢的强韧化途径[J].机械工程材料,2001(06):1-5. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%