利用GIeeble-1500对铸态AZ61镁合金在变形温度200~500℃,应变速率0.001~1s-1的条件下进行压缩变形;利用显微结构分析和硬度测试等研究不同变形条件下AZ61镁合金的组织和性能,引用Z值(Zener-Hoilomon系数)研究温度和应变速率对AZ61镁合金组织的影响,建立再结晶晶粒尺寸与z值之间的关系.结果表明:铸态AZ61镁合金在热变形时表现出动态再结晶特征,随温度上升,再结晶容易发生且峰值应力降低,再结晶晶粒尺寸随温度升高而增大;随应变速率上升,峰值应力增大且峰值应力对应的应变量增大,再结晶晶粒尺寸减小;硬度大小的变化也与动态再结晶密切相关.
参考文献
[1] | Mordike B L;Ebert T .Magnesium properties-applications-potential[J].Materials Science and Engineering A,2001,302:37-45. |
[2] | 陈振华;严红革;陈吉华.镁合金[M].北京:化学工业出版社,2004 |
[3] | Agnew SR;Duygulu O .Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B[J].International Journal of Plasticity,2005(6):1161-1193. |
[4] | Beer AG;Barnett MR .Influence of initial microstructure on the hot working flow stress of Mg-3Al-1Zn[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1-2):292-299. |
[5] | McQueen HJ.;Ryan ND. .Constitutive analysis in hot working[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1-2 Special Issue SI):43-63. |
[6] | Zhou H T;Liu L F;Wang Q D et al.Strain softening and hardening behavior in AZ61 magnesium alloy[J].Journal of Materials Science and Technology,2004,20:691-693. |
[7] | 陈振华.变形镁合金[M].北京:化学工业出版社,2005 |
[8] | Mwembela A;Konopleva E B;Mcqueen H J .Microatructural development in Mg alloy AZ31 during hot working[J].Scripta Materialia,1997,37:1789-1795. |
[9] | Myshlyaev MM.;McQueen HJ.;Mwembela A.;Konopleva E. .Twinning, dynamic recovery and recrystallization in hot worked Mg-Al-Zn alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):121-133. |
[10] | Humphreys F J;Hatherly M.Recrystallization and related annealing phenomena[M].Oxford:Elsevier Science Ltd,2004 |
[11] | Zhou H T;Zeng X Q;Liu L L et al.Microstruetural evolution of AZ61 magnesium alloy during hot deformation[J].Materials Science and Technology,2004,20:1397-1401. |
[12] | Yu Yoshida;Keita Arai;Shota Itoh;Shigeharu Kamado;Yo Kojima .Realization of high strength and high ductility for AZ61 magnesium alloy by severe warm working[J].Science and technology of advanced materials,2005(2):185-194. |
[13] | 郭强,严红革,陈振华,张辉.AZ31镁合金高温热压缩变形特性[J].中国有色金属学报,2005(06):900-906. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%