为了进一步提高Cr8钢轧辊的服役性能,利用数值模拟技术与实验对Cr8钢轧辊的最终热处理工艺进行了研究.首先利用实验测试了Cr8钢的材料性能参数;接着利用数值模拟技术分析了Cr8钢轧辊在其差温加热过程、喷雾淬火冷却过程及其回火过程中辊身内部特征节点温度、组织与应力的演化过程,并采用物理模拟技术验证了Cr8钢轧辊在连续喷雾淬火工艺下两个特征节点处的马氏体组织,从而验证了采用数值模拟技术研究Cr8钢轧辊最终热处理工艺的可行性;最后重点分析了连续喷雾淬火工艺与间歇喷雾淬火工艺对Cr8钢轧辊辊身内部特征节点温度、组织及应力演化过程的影响.结果表明,采用间歇喷雾淬火和低温回火工艺不仅可保证Cr8钢轧辊的淬硬层深度,而且可显著降低其心部所产生的拉应力,从而可保证其最终热处理过程安全.
Numerical simulation and experimental research were proformed to improve the performance of the Cr8 steel roll.The thermal parameters of the Cr8 steel were measured by experiments.The processes of heating,spray quenching and tempering were simulated to demonstrate the variations of temperature,microstructure and stress of the Cr8 steel roll during the final heat treatment.The continuous spray quenching process and the intermittent spray quenching process were primarily discussed to examine the influence on the final heat treatment of the Cr8 steel roll.Physical simulation was conducted on a Gleeble-3800 simulator to verify the effectiveness of the numerical simulation.It is found that the quenching stress can be largely reduced and the quenching security can be significantly increased when the intermittent spray quenching process and the low temperature tempering process are employed on the Cr8 steel roll.
参考文献
| [1] | CHI Hong-xiao;MA Dang-shen;YONG Qi-long;WU Li-zhi;ZHANG Zhan-pu;WANG Yong-wei.Effect of Cryogenic Treatment on Properties of Cr8-Type Cold Work Die Steel[J].钢铁研究学报（英文版）,2010(06):43-46,59. |
| [2] | 王葛;陈建坤;商松;刘利刚;杨庆祥;李强.Cr5锻钢支承辊最终热处理过程数值模拟[J].材料热处理学报,2014(6):195-201. |
| [3] | 王葛;王莉莉;高静娜;朱国善;杜雄飞;李强.30CrMo钢大直径厚壁压力气瓶淬火过程数值模拟[J].钢铁,2015(2):61-69. |
| [4] | 叶健松;李勇军;潘健生;胡明娟.大型支承辊热处理过程的数值模拟[J].机械工程材料,2002(6):12-15. |
| [5] | 杜凤山;张芳;黄华贵;李广睿.大型锻件喷雾冷却过程数值模拟[J].金属热处理,2008(5):35-38. |
| [6] | 王晓燕 .低压转子淬火工艺过程数值模拟的研究[D].上海交通大学,2011. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%