采用铜箔/90W-5Ni-5Co(质量分数,％)混合粉末/镍箔复合中间层,在加压5 MPa、连接温度1120℃、保温60 min的工艺条件下,对纯钨(W)和0Crl3Al钢进行了连接.利用SEM、EDS、电子万能试验机及水淬热震实验等手段研究了接头的微观组织、成分分布、断口特征、力学性能及抗热震性能.结果表明,连接接头由钨母材、Cu-Ni-Co合金层、钨基高密度合金层、镍层、钢母材5部分组成.接头中的钨基高密度合金层由90W-5Ni-5Co混合粉末固相烧结生成,其Ni-Co粘结相和钨颗粒相冶金结合且分布均匀.钨基高密度合金层与钨母材以瞬间液相扩散连接机制实现了良好结合.接头剪切强度达到286MPa,断裂均发生在钨基高密度合金层/镍层结合区域,断口形貌呈现为韧性断裂.经过60次700℃至室温的水淬热震测试,接头无裂纹出现.
参考文献
| [1] | 宋书香,周张健,都娟,姚伟志,葛昌纯.不同界面对等离子喷涂钨结合强度的影响[J].稀有金属材料与工程,2007(10):1811-1814. |
| [2] | 郭双全,葛昌纯,冯云彪,周张健,周海滨,王纯.面向等离子体材料钨厚涂层的制备及表征[J].稀有金属材料与工程,2011(12):2167-2170. |
| [3] | Basuki, W.W.;Aktaa, J. .Investigation on the diffusion bonding of tungsten and EUROFER97[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2011(1/3):524-527. |
| [4] | Weber, T.;Stüber, M.;Ulrich, S.;Va?en, R.;Basuki, W.W.;Lohmiller, J.;Sittel, W.;Aktaa, J. .Functionally graded vacuum plasma sprayed and magnetron sputtered tungsten/EUROFER97 interlayers for joints in helium-cooled divertor components[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2013(1/3):29-39. |
| [5] | Kalin BA;Fedotov VT;Sevrjukov ON;Kalashnikov AN;Suchkov AN;Moeslang A;Rohde M .Development of brazing foils to join monocrystalline tungsten alloys with ODS-EUROFER steel[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2007(b):1218-1222. |
| [6] | Weber, T.;Zhou, Z.;Qu, D.;Aktaa, J. .Resistance sintering under ultra high pressure of tungsten/EUROFER97 composites[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2011(1):19-22. |
| [7] | 杨宗辉,沈以赴,李晓泉.自生成钨基高密度合金中间层的钨/钢真空扩散连接[J].机械工程学报,2013(04):58-63. |
| [8] | 李军,杨建锋,乔冠军.连接温度对Ti为中间层钨/铜合金扩散接头组织和强度的影响[J].稀有金属材料与工程,2012(07):1235-1238. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%