采用树脂结合剂金刚石砂轮,通过对2D-C/SiC复合材料高速深磨磨削加工,并对磨削表面形貌和亚表面损伤进行了观察。提出了2D-C/SiC摩擦层（表面）的磨削力理论公式,讨论了磨削加工用量对磨削力和磨削力比的影响。实验结果表明,2D-C/SiC复合材料的高速深磨材料去除机制与其自身的微观结构相关,既不同于塑性材料,也不同于普通脆性材料,而是以脆性断裂去除为主。
The grinding experiments were conducted on 2D-C/SiC composites by using resin bond diamond wheel in this work.The ground surface/subsurface damages were observed.The theory expression of grinding force for the friction layer（surface） of 2D-C/SiC was proposed,and the effect of grinding machining process amount on grinding force and force ratio was also discussed.The result indicates that the removal mechanisms involved in the grinding process for 2D-C/SiC composites are dominated by their brittleness fractures and related to their microstructures,which are different from those of ordinary plastic and brittle materials.
参考文献
| [1] | 张立同,成来飞.连续纤维增韧陶瓷基复合材料可持续发展战略探讨[J].复合材料学报,2007,24(2):1-6. |
| [2] | 张立同,成来飞,徐永东,等.自愈合碳化硅陶瓷基复合材料研究及应用进展[J].航空材料学报,2006,26(3):226-232. |
| [3] | Zhang Litong, Cheng Laifei, Luan Xingang: et al. Environmental performance testing system for thermostructure materials applied in aeroengines [ J ]. Key Engineering Materials, 2006, 313:183-190 |
| [4] | 张立同,成来飞,徐永东.新型碳化硅陶瓷基复合材料的研究进展[J].航空制造技术,2003(1):24-32. |
| [5] | Malkin S, Hwang T. Grinding mechanisms for ceramics [J]. CIRP Annals:Manufacturing Technology, 1996, 45(2) : 569- 580. |
| [6] | Li K, Liao T W, Modeling of ceramic grinding processes part I : Number of cutting points and grinding forces per grit [J]. Journal of Material Processing Technology, 1997, 65 ( 1 - 3) : 1-10 |
| [7] | Weinert K, Jansen T. Machining aspects for the drilling of C/ C-SiC materials IMp. Germanyz Wilcy-VCH Verlag GmbH Co KGaA, 2008: 287-301 |
| [8] | Tawakoli T, Azarhoushang B. Intermittent grinding of ceramic matrix composites (CMCs) utilizing a developed segmented wheet [J]. International Journal of Machine Tools Manufacture, 2011, 51(2): 112-119. |
| [9] | Klocke F, Verlemann E, Schippers C. High-speed grinding of ceramics[M]// Machining of Ceramics and Composites. New York: Marcel Dekker, 1999: 855-1118 |
| [10] | Tashiro T, Fujiwara J, Takenaka Y. Grinding of C/C - SiC composite in dry method [M] // Towards Synthesis of Micro/ Nano-Systems. London: Springer, 2007: 351-352 |
| [11] | Huang H, Liu Y C. Experimental investigations of machining characteristics and removal mechanisms of advanced ceramics in high speed deep grinding [J]. International Journal of Machine Tools Manufacture, 2003, 43(8): 811-823. |
| [12] | 任敬心,康仁科,王西彬.难加工材料磨削技术[M].北京:电子工业出版社,2011. |
| [13] | Rowe W B. Thermal analysis of high efficiency deep grinding [J]. International Journal of Machine Tools & Manufacture, 2001, 41(1): 1-19. |
| [14] | BatakoA D, Rowe W B, Morgan M N. Temperature measurement in high efficiency deep grinding [J]. International Journal of Machine Tools & Manufacture, 2005, 45(11):1231-1245. |
| [15] | Huang H. Machining characteristics and surface integrity of yttria stabilized tetragonal zirconia in high speed deep grinding [J]. Materials Science and Engineering A, 2003, 345 (1/2) 155-163. |
| [16] | 全燕鸣,叶邦彦.复合材料的切削加工表面结构与表面粗糙度[J].复合材料学报,2001,18(4):128-132. |
| [17] | 盛晓敏.超高速磨削技术[M].北京:机械工业出版社,2010. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%