用ABAQUS有限元软件结合弧长法对镀层薄板冲压成形进行数值模拟,研究了镍镀层薄板在不同应变路径下的平面应变,得到了镀层的冲压成形极限,并用RG2000型微机控制电子万能试验机结合ARGUS板金成形网格应变测试系统对镍镀层薄板进行冲压成形实验验证.结果表明,用弧长法得到的失稳减薄率可以较好地预测镀层的成形极限,而以微裂纹产生时的减薄率为失穗依据在一定程度上可以满足工程需要.
参考文献
| [1] | Zhao L;Sowerby R;Sklad M P .A theoretical and experi mental investigation of limit strains in sheet metal forming[J].International Journal of Mechanical Sciences,1996,38(12):1307. |
| [2] | Swift H W .Plastic instability under plane stress[J].Journal of the Mechanics and Physics of Solids,1952,1(01):1. |
| [3] | Marciniak Z;Kuczynski K .Limit strains in the processes of stretch-forming sheet metal[J].International Journal of Mechanical Sciences,1967,9(09):609. |
| [4] | Storen S;Rice J R .Located necking in thin sheets[J].Journal of the Mechanics and Physics of Solids,1975,23:421. |
| [5] | 任晓雷 .镀层金属薄板成形过程的变形与失效研究[D].湘潭大学,2011. |
| [6] | Kumar S;Date P P et al.A new criterion to predict necking failure under biaxial stretching[J].Journal of Materials Processing Technology,1994,45(1-4):583. |
| [7] | Fahrettin Ozturk;Daeyong Lee .Analysis of forming limits using ductile fracture criteria[J].Journal of Materials Processing Technology,2004(3):397-404. |
| [8] | Wempner G A .Discrete approximations related to nonlinear theories of solids[J].International Journal of Solids and Structures,1971,7(11):1581. |
| [9] | Risks E .An incremental approach to the solution of snapping and buckling problems[J].International Journal of Solids and Structures,1979,15(07):529. |
| [10] | Ramm E .Strategies for tracing the nonlinear response near limit points[J].Non-linear Finite Element Analysis in Structura/Mechanics,1981,12(03):63. |
| [11] | Crisfield M A .An arc-length method including line searches and accelerations[J].International Journal for Numerical Methods in Engineering,1983,19(09):1269. |
| [12] | XISO/CD12004-1997.XISO/CD12004-1997.金属材料的成形极限图的测定指南[S].北京:中国标准出版社,2005. |
| [13] | GB/T 15825.8-1995.GB/T 15825.8-1995.金属薄板成形性能与试验方法成形极限图(FLD)试验[S].北京:中国标准出版社,1995. |
| [14] | Takuda H;Mori K et al.Prediction of forming limit in deep drawing of Fe/Al laminated composite sheets using ductile fracture criterion[J].Journal of Materials Processing Technology,1996,60(06):291. |
| [15] | Lin H;Wang J et al.Predictive modeling for optimization of textile composite forming[J].Composites Science and Technology,2007,67(15-16):3242. |
| [16] | Philippe Boisse;Bassem Zouari;Alain Gasser .A mesoscopic approach for the simulation of woven fibre composite forming[J].Composites science and technology,2005(3/4):429-436. |
| [17] | 林忠钦;李淑慧.车身覆盖件冲压成形仿真[M].北京:清华大学出版社,1996 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%