Ti6Al4V合金表面激光熔覆功能复合涂层研究进展

稀有金属材料与工程, 2012, 41(1): 178-183.

Ti6Al4V合金表面激光熔覆功能复合涂层研究进展

张晓伟 ^1, , 刘洪喜 ^2, , 蒋业华 ^3, , 王传琦 ^4, , 曾维华 ^5,

1.昆明理工大学,云南昆明650093

2.昆明理工大学,云南昆明650093

3.昆明理工大学,云南昆明650093

4.昆明理工大学,云南昆明650093

5.昆明理工大学,云南昆明650093

基金项目: 昆明理工大学创新基金(2010YB025) 国家自然科学基金(51165015) 云南省自然科学基金(2008ZC021M)

关键词：激光熔覆 , Ti6Al4V , 功能复合涂层 , 研究进展

Research Progress of Functional Composite Coatings on Ti6Al4V Alloy Surface Prepared by Laser Cladding Technique

Ti6Al4V合金表面激光熔覆功能复合涂层能显著提高合金的摩擦磨损、高温抗氧化性能.本文在总结和评述Ti6Al4V合金表面激光熔覆功能复合涂层材料体系及性能的基础上,提出了该工艺存在的不足及解决途径,并对其发展进行了展望.

参考文献

[1]	Budzynski P et al.[J].Wear,2006,261:1271.
[2]	Atar Erdem et al.[J].Surface and Coatings Technology,2008,202:4583.
[3]	Lakshmi S Gokul et al.[J].Materials Chemistry and Physics,2002,76:187.
[4]	Kahraman Nizamettin et al.[J].International Journal of Impact Engineering,2007,34:1423.
[5]	Williams J M;Buchanan R A .[J].Materials Science and Engineering,1985,69:237.
[6]	于家斗.用高能束流进行钛合金表面改性[J].稀有金属材料与工程,1992(06):1-7.
[7]	刘洪喜,汤宝寅,王浪平,王小峰.钛合金的等离子体浸没离子注入表面强化处理[J].稀有金属材料与工程,2005(08):1318-1321.
[8]	Fouquet V.;Pichon L.;Drouet M.;Straboni A. .Plasma assisted nitridation of Ti-6Al-4V[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2004(1/4):248-258.
[9]	Guo Baogang et al.[J].Materials Science and Engineering,2008,A480:404.
[10]	Zhang S.;Wang MC.;Man HC.;Wu WT. .In-situ synthesis and wear performance of TiC particle reinforced composite coating on alloy Ti6Al4V[J].Surface & Coatings Technology,2001(1):95-100.
[11]	Roy Mangal et al.[J].Acta Biomaterialia,2008,4:324.
[12]	黄瑜,陈静,张凤英,林鑫,黄卫东.热处理对激光立体成形TC11钛合金组织的影响[J].稀有金属材料与工程,2009(12):2146-2150.
[13]	Man H C et al.[J].Scripta Materialia,2001,44:2801.
[14]	Zeng Xiaoyan et al.[J].Surface and Coatings Technology,1996,79:162.
[15]	李崇桂,田伟,杨勇,王铀.TC4钛合金表面等离子喷涂Al2O3-13wt%TiO2涂层及激光重熔研究[J].材料热处理学报,2007(z1):228-232.
[16]	何康康,田宗军,王东生,沈理达,刘志东,黄因慧.钛合金表面激光重熔等离子喷涂陶瓷涂层研究[J].热处理技术与装备,2008(06):42-45,55.
[17]	李平,邓永瑞.钛合金表面激光熔覆氧化锆陶瓷过渡区的显微组织[J].稀有金属材料与工程,1995(05):17-22.
[18]	Zhang S.;Wang MC.;Man HC.;Wu WT. .In-situ synthesis and wear performance of TiC particle reinforced composite coating on alloy Ti6Al4V[J].Surface & Coatings Technology,2001(1):95-100.
[19]	Tian YS;Chen CZ;Li ST;Huo QH .Research progress on laser surface modification of titanium alloys[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2005(1/2):177-184.
[20]	Sun RL.;Mao JF.;Yang DZ. .Microscopic morphology and distribution of TiC phase in laser clad NiCrBSiC-TiC layer on titanium alloy substrate[J].Surface & Coatings Technology,2002(2/3):203-207.
[21]	Khor KA.;Gu YW.;Quek CH.;Cheang P. .Plasma spraying of functionally graded hydroxyapatite/Ti-6Al-4V coatings[J].Surface & Coatings Technology,2003(2/3):195-201.
[22]	Garcia I et al.[J].Corrosion Science,1998,40(08):1411.
[23]	孙荣禄,牛伟,王成扬.钛合金表面激光熔覆TiN-Ni基合金复合涂层的组织和磨损性能[J].稀有金属材料与工程,2007(01):7-10.
[24]	Meng QW;Geng L;Zhang BY .Laser cladding of Ni-base composite coatings onto Ti-6Al-4V substrates with pre-placed B4C+NiCrBSi powders[J].Surface & Coatings Technology,2006(16/17):4923-4928.
[25]	CAI Lifang,ZHANG Yongzhong,SHI Likai.Microstructure and formation mechanism of titanium matrix composites coating on Ti-6Al-4V by laser cladding[J].稀有金属(英文版),2007(04):342-346.
[26]	Tang H B et al.[J].Acta Materialia,2004,52:1773.
[27]	Jasim K Mohammed et al.[J].Journal of Materials Science,1993,28:2820.
[28]	Alhammad, M;Esmaeili, S;Toyserkani, E .Surface modification of Ti-6Al-4V alloy using laser-assisted deposition of a Ti-Si compound[J].Surface & Coatings Technology,2008(1/2):1-8.
[29]	薛轶,王华明.激光熔炼TiCo/Ti5Si3双相金属间化合物合金组织及耐磨性[J].稀有金属材料与工程,2007(12):2194-2198.
[30]	袁源,王华明.激光熔化沉积α/Fe9Cr9Si2三元金属硅化物耐磨合金组织和摩擦学性能[J].稀有金属材料与工程,2008(09):1660-1663.
[31]	徐亚伟,王华明.激光熔化沉积γ/Mo2Ni3Si金属硅化物合金的腐蚀行为[J].稀有金属材料与工程,2007(04):660-664.
[32]	Wang H M et al.[J].Materials Science and Engineering,2002,A338:126.
[33]	Gillon Pascale .[J].Materials Science and Engineering,2000,A287:146.
[34]	Wu Weite .[J].Scripta Materialia,2000,42:661.
[35]	Foroozmehr Ehsan et al.[J].Journal of Manufacturing Processes,2009,11:38.
[36]	Chen Shang-Liang et al.[J].Optics & Laser Technology,1998,30:263.
[37]	李俊昌.激光的衍射及热作用计算[M].北京:科学出版社,2008:192.
[38]	Coelho JP.;Pires MC.;Abreu MA. .High-speed laser welding of plastic films[J].Optics and Lasers in Engineering,2000(4/6):385-395.
[39]	Liu Qibin et al.[J].Journal of Functional Materials,2005,36(01):50.
[40]	Pei Y T et al.[J].Acta Materialia,2002,50:2035.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

Ti6Al4V合金表面激光熔覆功能复合涂层研究进展

Research Progress of Functional Composite Coatings on Ti6Al4V Alloy Surface Prepared by Laser Cladding Technique

参考文献