欢迎登录材料期刊网

材料期刊网

高级检索

采用水雾化Fe74Cr2Mo2Sn2P10C2Si4B4非晶磁粉制备出了高频特性较好的磁粉芯。研究了去应力退火和磁场退火对磁粉芯磁性能的影响。结果表明:非晶磁粉芯压制后的去应力退火处理能有效提高磁导率和品质因数。过高热处理温度使非晶粉末晶化,析出导电性较差的非铁磁相,恶化磁性能。最佳退火温度为400℃,最佳的磁性能为:在3500 kHz的频率下,μ=40.5,Q=225。磁场退火对Fe74Cr2Mo2Sn2P10C2Si4B4非晶磁粉芯磁导率影响较小。纵向磁场退火能增大非晶磁粉芯的损耗,横向磁场退火能降低非晶磁粉芯的损耗,磁粉芯总损耗变化主要来源于磁滞损耗。

Water-atomized amorphous Fe74Cr2Mo2Sn2P10C2Si4B4 magnetic powder cores with better high-frequency magnetic properties were prepared.The effect of annealing and magnetic annealing on its magnetic properties was researched.The results show that magnetic permeability and quality factor of the Fe74Cr2Mo2Sn2P10C2Si4B4 magnetic powder core increase effectively after annealing.Over-annealing can deteriorate magnetic properties for crystallization of amorphous powder and forming of nonmagnetic phase.The optimum annealing temperature is 400 ℃,the optimum magnetic permeability is 40.5 and the optimum quality factor is 225 in frequency of 3500 kHz.Magnetic annealing has less effect on permeability of the amorphous magnetic powder core.Longitudinal magnetic annealing can increase total loss of the amorphous magnetic powder core,transverse magnetic annealing can decrease total loss.The change of total loss depends on hysteresis loss.

参考文献

[1] Yoshizawa Y;Oguma S;Yamauehi K .New Fe-based soft magnetic alloys composed of uhrafine grain structure[J].Journal of Applied Physics,1988,64:6044-6046.
[2] Muller M;Novy A;Brunner M .Powder composite core of nanoerystalline soft magnetic FeSiBCuNh alloys[J].J M agn Magn Mater,1999,196:357-358.
[3] Iqbal Y.;Davies HA.;Gibbs MRJ.;Woodcock TR.;Todd I.;Major RV. .Nanocrystalline powder cores for high frequency applications[J].Journal of Magnetism and Magnetic Materials,2002(1):282-284.
[4] Kang E Y;Kim Yoon B;Kim K Y et al.Preparation of Fe-Si-B-Nb amorphous powder Cores with excellent high-frequency magnetic properties[J].Journal of Magnetism and Magnetic Materials,2006,304:e182-e185.
[5] Yoon B. Kim;D.H. Jang;H.K. Seok;K.Y. Kim .Fabrication of Fe-Si-B based amorphous powder cores by cold pressing and their magnetic properties[J].Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing,2007(1/2):389-393.
[6] Matsumoto H;Urata A;Yamada Y et al.FePBNbCr soft-magnetic glassy alloys with low loss characteristics for inductor cores[J].Journal of Alloys and Compounds,2010,504(S):S139-S141.
[7] 陆曹卫,卢志超,郭峰,王峻,李德仁,周少雄.水雾化Fe69Ni5Al4Sn2P10C2B4Si4非晶合金粉末及其磁粉芯的性能[J].钢铁研究学报,2007(09):33-35.
[8] 陆曹卫,卢志超,孙克,李德仁,周少雄.水雾化制备Fe74Al4Sn2P10C2B4Si4非晶合金粉末及其磁粉芯性能研究[J].物理学报,2006(05):2553-2556.
[9] H. Shokrollahi;K. Janghorban .Different annealing treatments for improvement of magnetic and electrical properties of soft magnetic composites[J].Journal of Magnetism and Magnetic Materials,2007(0):61-67.
[10] 卢佃清,刘学东,徐超,周朕,史林兴.热处理温度对纳米晶Ni0.35Zn0.65Fe2O4吸波性能的影响[J].材料热处理学报,2010(07):5-9.
[11] Shokrollahi H;Janghorban K .Soft magnetic composite materials[J].Journal of Materials Processing Technology,2007,189:1-12.
[12] 尹福正,杨钰婷,崔建民,田建军,袁勇,张深根,张德金,李霆.铁粉热处理对铁基软磁材料性能的影响[J].材料热处理学报,2010(06):45-48.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%