采用粉末冶金法制备30%B4C/6061Al复合材料坯料,经过二次加工(挤压+轧制)后得到复合材料板材,对板材进行T6(530℃保温2h后中温水淬,175℃时效6.5h)热处理.采用光学显微镜(OM)和透射电子显微镜(TEM)对热处理前后复合材料的微观组织形貌进行观察,运用显微硬度仪和万能拉伸试验机对复合材料的热处理前后的力学性能进行测试.结果表明:退火态时观察到再结晶晶粒和少量位错;时效态时观察到大量的位错和析出相.热处理状态对复合材料伸长率无明显的影响,但对材料的硬度和抗拉强度影响较大,B4C/6061Al复合材料经T6热处理后硬度和抗拉强度分别提高了15%和12%.
参考文献
[1] | 王东山;薛向欣;刘然;张淑会.B4C/Al复合材料的研究进展及展望[J].材料导报,2007(z1):388-390,397. |
[2] | 陈剑虹;李明娥;余江瑞;乔及森.热处理工艺对6061铝合金显微组织及力学性能的影响[J].兰州理工大学学报,2010(2):15-17. |
[3] | 郭娟;金培鹏;李丽荣;王金辉.热处理对Mg2B2O5w/6061Al复合材料干摩擦性能影响[J].材料热处理学报,2013(12):30-34. |
[4] | 马国俊;丁雨田;金培鹏;刘国龙.热处理对粉末热挤压法制备6061铝合金强度和塑性的影响[J].材料科学与工艺,2014(4):101-107. |
[5] | Chen, H. S.;Wang, W. X.;Li, Y. L.;Zhang, P.;Nie, H. H.;Wu, Q. C..The design, microstructure and tensile properties of B4C particulate reinforced 6061Al neutron absorber composites[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2015:23-29. |
[6] | P.C. Kang;Z.W. Cao;G.H. Wu.Phase identification of Al-B_4C ceramic composites synthesized by reaction hot-press sintering[J].International Journal of Refractory Metals & Hard Materials,20102(2):297-300. |
[7] | Kunkun Deng;Juyan Shi;Cuiju Wang.Microstructure and strengthening mechanism of bimodal size particle reinforced magnesium matrix composite[J].Composites, Part A. Applied science and manufacturing,20128(8):1280-1284. |
[8] | 赵敏;姜龙涛;武高辉.热处理对挤压铸造TiB2P/6061Al复合材料组织与性能的影响[J].中国有色金属学报,2007(4):536-541. |
[9] | Dong H. Nam;Seung I. Cha;Byung K. Lim.Synergistic strengthening by load transfer mechanism and grain refinement of CNT/Al-Gu composites[J].Carbon: An International Journal Sponsored by the American Carbon Society,20127(7):2417-2423. |
[10] | S.C. Sharma.Effect of Albite Particles on the Coefficient of Thermal Expansion Behavior of the A16061 Alloy Composites[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,20003(3):773-780. |
[11] | 王航;韩礼红;胡锋;冯耀荣;孙军.回火温度对抗硫钻杆钢析出相形貌及力学性能的影响[J].材料热处理学报,2012(3):88-93. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%