洛神花纤维增强通用树脂复合物的力学性能及其化学镀镍金属化

电镀与涂饰 , 2011, 30(12): 29-31.

洛神花纤维增强通用树脂复合物的力学性能及其化学镀镍金属化

^1, , ^2, , ^3, , ^4, , ^5,

1.Design Division, School of Mechanical and Building Sciences, VIT university, Vellore-632 014, India

2.Design Division, School of Mechanical and Building Sciences, VIT university, Vellore-632 014, India

3.Materials Chemistry Division, School of Advanced Sciences, VIT university, Vellore-632 014, India

4.Manufacturing Division, School of Mechanical and Building Sciences, VIT university, Vellore-632 014, India

5.Manufacturing Division, School of Mechanical and Building Sciences, VIT university, Vellore-632 014, India

关键词：洛神花 , 通用树脂 , 复合物 , 化学镀镍 , 金属化 , 力学

Mechanical properties of gongura fiber-reinforced general purpose resin composite and its metallization by electroless nickel plating process

KOTA B ^1, , VENKATACHALAM G ^2, , KARTHIKEYAN S ^3, , NARAYANAN S ^4, , PANDIVELAN C ^5,

1.Design Division, School of Mechanical and Building Sciences, VIT university, Vellore-632 014, India

2.Design Division, School of Mechanical and Building Sciences, VIT university, Vellore-632 014, India

3.Materials Chemistry Division, School of Advanced Sciences, VIT university, Vellore-632 014, India

4.Manufacturing Division, School of Mechanical and Building Sciences, VIT university, Vellore-632 014, India

5.Manufacturing Division, School of Mechanical and Building Sciences, VIT university, Vellore-632 014, India

Keywords： gongura , general purpose resin , composite , electroless nickel plating , metailization , mechanics

洛神花纤维采用5％的氢氧化钠溶液处理后用于制备纤维增强型通用树脂复合物.对含不同纤维体积分数的复合物的拉伸行为进行研究后发现,其力学性能与传统复合物类似.复合物的抗拉强度随着纤维含量的增大而提高.采用化学镀镍工艺对复合物进行金属化后,其显微硬度是原来的7倍.

The gongura fiber was treated with 5％ NaOH solution and then used to make a fiber-reinforced general purpose resin composite.The tensile behaviors of the composites prepared with different volume fractions of treated fibers were studied,indicating they have similar mechanical properties with traditional composites.The tensile strength of composite is increased with the increasing of fiber content.The microhardness of the composite metalized by electroless nickel plating process is 7 times greater than that of the pure composite.

参考文献

[1]	Richa Agrawal;N. S. Saxena;K. B. Sharma;S. Thomas;M. S. Sreekala .Activation energy and crystallization kinetics of untreated and treated oil palm fibre reinforced phenol formaldehyde composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):77-82.
[2]	S. Mishra;A.K. Mohanty;L.T. Drzal .Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites[J].Composites science and technology,2003(10):1377-1385.
[3]	Huang Gu .Tensile behaviours of the coir fibre and related composites after NaOH treatment[J].Materials & design,2009(9):3525-3536.
[4]	Takashi Nishino;Koichi Hirao;Masaru Kotera .Kenaf reinforced biodegradable composite[J].Composites science and technology,2003(9):1281-1286.
[5]	VALADEZ-GONZALEZ A;CERVANTES-UC J M;OLAYO R et al.Effect of fiber surface treatment on the fiber-marx bond strength of natural fiber reinforced composites[J].Composites Part B:Engineering,1999,30(03):309-320.
[6]	Xue Li;Lope G. Tabil;Satyanarayan Panigrahi .Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review[J].Journal of polymers and the environment,2007(1):25-33.
[7]	YANG M C .Preparation of WC-Co based nanocomposite powders and alloy[D].沈阳:中国科学院金属研究所,2004.
[8]	MALLORY G O;HAJDU J B.Electroless Plating:Fundamentals and Applications[M].Norwich:American Electroplaters and Surface Finishers Society,1996
[9]	Rudnik E;Kokoszka K;Lapsa J .Comparative studies on the electroless deposition of Ni-P, Co-P and their composites with SiC particles[J].Surface & Coatings Technology,2008(12):2584-2590.
[10]	Liu YY;Yu J;Huang H;Xu BH;Liu XL;Gao Y;Dong XL .Synthesis and tribological behavior of electroless Ni-P-WC nanocomposite coatings[J].Surface & Coatings Technology,2007(16/17):7246-7251.
[11]	Sarret M;Muller C;Amell A .Electroless NiP micro- and nano-composite coatings[J].Surface & Coatings Technology,2006(1/2):389-395.
[12]	L. Y. Wang;J. P. Tu;W. X. Chen Y. C. Wang;X. K. Liu;Chads Olk;D. H. Cheng;X. B. Zhang .Friction and wear behavior of electroless Ni-based CNT composite coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2003(12):1289-1293.
[13]	KARTHIKEYAN S,SRINIVASAN K N,VASUDEVAN T,JOHN S.化学镀Ni-P-Cr2O3和Ni-P-SiO2复合镀层的研究[J].电镀与涂饰,2007(01):1-6.
[14]	KARTHIKEYAN S;VENKATACHALAM G;SRINIVASAN K N et al.Development of eleetroless Ni-P-BaSO4 composite coatings[J].Electroplating and Finishing,2011,30(03):31-34.

上一张下一张

计量

下载量()
访问量()

作者相关

在本站搜索
在百度学术搜索
在万方数据库搜索
在CNKI搜索

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网