用爆炸焊接法制备了TA2/Q235钢复合板,用光学显微镜、扫描电子显微镜分析了复合板末端开裂的原因。结果表明：在末端开裂区域的结合面形成了过渡层,开裂裂纹出现在结合界面和Q235钢基体内部;爆炸焊接后在钛板两侧和末端出现延展变形,延展部分超出钛板原始尺寸5～8mm;爆炸焊接时钛板软化是末端开裂的内因,复合板末端拉应力波是末端开裂的外因。
Explosive welding was applied to prepare TA2/Q235 steel composite plates.The reasons of cracking at the end of the composite plate were analyzed by optical microscopy and scanning electron microscopy.The results show that transition layer formed on the interface of end-cracking zone,and crack appeared in the inside of interface and Q235 steel substrate.Ductility deformation appeared at both sides and end of titanium plate,the ductility part was 5-8 mm beyond original length.Softening of titanium plate during explosive welding was the internal cause for the end-cracking and tension stress wave at the end of composite plates was the external cause.
参考文献
| [1] | S.A.A. Akbari Mousavi;P. Farhadi Sartangi .Experimental Investigation Of Explosive Welding Of Cp-titanium/aisi 304 Stainless Steel[J].Materials & design,2009(3):459-468. |
| [2] | Nizamettin Kahraman;Behcet Giilenc;Fefaim Findik .Joining of titanium/stainless steel by explosive welding and effect on interface[J].Journal of Materials Processing Technology,2005(2):127-133. |
| [3] | 刘鹏,陆明,田涛,余龙.钛/钢复合板爆炸焊接试验及结合界面研究[J].热加工工艺,2010(07):30-33. |
| [4] | 冯健,史和庆.钛/钢复合板爆炸焊接后周边端部被撕裂的机理分析[J].压力容器,2008(02):1-4. |
| [5] | Palavesamuthu Manikandan;Kazuyuki Hokamoto;Andrei A. Deribas .Explosive Welding of Titanium/Stainless Steel by Controlling Energetic Conditions[J].Materials transactions,2006(8):2049-2055. |
| [6] | 孙智,苏铁健,李淑华,王富耻.高应变率下工业纯钛TA2变形与失效研究[J].兵器材料科学与工程,2007(03):43-48. |
| [7] | S. NEMAT-NASSER;W. G. GUO;J. Y. CHENG .MECHANICAL PROPERTIES AND DEFORMATION MECHANISMS OF A COMMERCIALLY PURE TITANIUM[J].Acta materialia,1999(13):3705-3720. |
| [8] | 杨扬,程信林,安宁龙.TB2钛合金绝热剪切行为的数值模拟[J].中国有色金属学报,2004(05):718-724. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%