对铸态Cu-38.13Zn-0.21Al合金进行l～5 GPa,720℃保温20 min的高温高压处理,采用热常数测试仪和赛贝克电阻率测试仪测试了高温高压处理前后Cu-38.13Zn-0.21Al合金的热扩散系数及电阻率,用光学显微镜和透射电子显微镜对其微观组织进行观察,并根据实验结果探讨了高温高压处理对Cu-38.13Zn-0.21Al合金热扩散系数及电阻率的影响.结果表明:高温高压处理能细化合金组织及增大组织内位错密度,使其热扩散系数降低和电阻率升高,在l ～5 GPa范围内,压力为3 GPa时,热扩散系数达到最低值,为0.3024 cm2·s-1,较铸态样品的值降低了14.79％,而电阻率达到最高值,为7.657×10-8 Ω·m-1,较铸态样品的值增大了7.48％.
参考文献
| [1] | LI Yu-long;YANG Jin;LI Wei et al.Brazing of low carbon steel automotive radiator pipe using of Cu-Zn alloy[J].Advanced Materials Research,2011,233-235:2718-2721. |
| [2] | Mouna Baklouti;Ridha Mnif;Riadh Elleuch .Impact of surface hardening treatment generated by shot peening on the fatigue life of brass alloy[J].Journal of Mechanical Science and Technology,2012(9):2711-2717. |
| [3] | 蔡薇,刘仁辉,魏仕勇,刘羽飞.黄铜表面富植酸钝化工艺研究[J].稀有金属,2012(04):671-675. |
| [4] | 吴卫华.铜及铜合金晶粒细化方法的研究现状[J].湖南冶金,2006(05):44-48. |
| [5] | Wenbin Dai;Xinli Wang .Effect of Electric Current on the Inclusions in a Cu-Zn Alloy[J].Materials transactions,2010(5):892-895. |
| [6] | Wang, X.;Dai, W.;Ma, C.;Zhao, X. .Effect of electric current direction on recrystallization rate and texture of a Cu-Zn alloy[J].Journal of Materials Research,2013(10):1378-1385. |
| [7] | Z.J. Zhang;X.H. An;P. Zhang .Effects of dislocation slip mode on high-cycle fatigue behaviors of ultrafine-grained Cu-Zn alloy processed by equal-channel angular pressing[J].Scripta materialia,2013(6):389-392. |
| [8] | H. Miura;T. Sakai;S. Maruoka .Production of recrystallized nano-grains in a fine-grained Cu-Zn alloy[J].Philosophical Magazine Letters,2010(2):93-101. |
| [9] | C HEN Yan;LI Ya-li;LIU Jian-hua et al.Effect of 2GPa pressure treatment on the microstructure evolution of Cu-Zn alloy[J].Materials Transactions,2013,54(02):184-187. |
| [10] | LIU Yu-wen;LIU Lin;ZHANG Wei et al.Effect of high pressure heat treatment on microstructure and corrosion resistance of brass[J].Advanced Materials Research,2011,194-196:1257-1260. |
| [11] | ZHAO Jun,LIU Lin,YANG Jingru,PENG Guirong,LIU Jianhua,ZHANG Ruijun,XING Guangzhong.Effects of high pressure on the microstructure and hardness of a Cu-Zn alloy[J].稀有金属（英文版）,2008(05):541-544. |
| [12] | 谌岩,刘琳,王月辉,刘建华,张瑞军.Cu-Zn合金高压热处理后的组织演化及热膨胀性能[J].中国有色金属学报（英文版）,2011(10):2205-2209. |
| [13] | WANG Hai-Yan,CHEN Yan,LIU Yu-Wen,LI Fei,LIU Jian-Hua,PENG Gui-Rong,WANG Wen-Kui.Pressure Effects on Solid State Phase Transformation of Aluminium Bronze in Cooling Process[J].中国物理快报（英文版）,2009(10):140-143. |
| [14] | 陈长江,王渠东,尹冬弟,丁文江.两种Mg-Gd-Y-Zr镁合金的热物理性能[J].特种铸造及有色合金,2009(10):950-952. |
| [15] | 毕莉明,刘平,陈小红,宋鑫,刘新宽,马凤仓,李伟.变形方式对Cu-8.3Fe-1Ag形变原位复合材料组织性能的影响[J].材料热处理学报,2012(03):28-34. |
| [16] | 周尧和;胡壮麒;介万奇.凝固技术[M].北京:机械工业出版社,1998 |
| [17] | 孙淑华,李杰,徐瑞,赵海丽,刘日平.高压下Al基合金的凝固组织特征[J].高压物理学报,2008(04):434-438. |
| [18] | ZHAO Jun,LIU Lin,YANG Jingru,PENG Guirong,LIU Jianhua,ZHANG Ruijun,XING Guangzhong.Effects of high pressure on the microstructure and hardness of a Cu-Zn alloy[J].稀有金属（英文版）,2008(05):541-544. |
| [19] | WANG Ping,LU Wei,WANG Yuehui,LIU Jianhua,ZHANG Ruijun.Effects of cryogenic treatment on the thermal physical properties of Cu76.12Al23.88 alloy[J].稀有金属（英文版）,2011(06):644-649. |
| [20] | 王博,梁淑华,邹军涛,杨晓红,肖鹏.Fe含量对钼铜合金组织和性能的影响[J].稀有金属材料与工程,2011(09):1621-1624. |
| [21] | 王菲,蔡辉,王亚平.用高能球磨法制备的细晶Al-50Si合金的组织与性能[J].材料研究学报,2009(05):495-499. |
| [22] | 黄巧建,刘晓峻,张淑仪.利用瞬态热栅技术研究Sr2FeMoO6的热扩散系数及其温度效应[J].声学学报,2011(02):134-138. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%