欢迎登录材料期刊网

材料期刊网

高级检索

介绍了塑性有限元法在金属轧制过程中组织演化模拟的发展历程和新进展,包括刚塑性有限元法和弹塑性有限元法的理论基础;通过物理冶金模型有限元模拟轧制过程中的组织演变;元胞自动机与有限元结合进行轧制过程多尺度综合模拟;利用晶体塑性有限元研究轧制过程中成形极限、取向织构和空洞长大行为等.最后展望了其今后的发展趋势.

参考文献

[1] 刘相华;胡贤磊;杜林秀.轧制参数计算模型及其应用[M].北京:化学工业出版社,2007:3.
[2] R. Luce;M. Wolske;R. Kopp;F. Roters;G. Gottstein .Application of a dislocation model for FE-process simulation[J].Computational Materials Science,2001(1):1-8.
[3] Engler O;Lochte L;Hirsch J .Through-process simulation of texture and properties during the thermomeehanical processing of aluminium sheets[J].Acta Materialia,2007,55(16):5449.
[4] Talamantes-Silva J;Abbod M F;Cabrera E S et al.Microstructure modelling of hot deformation of Al-1% Mg alloy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2009,525(1-2):147.
[5] H. AHMED;M.A. WELLS;D.M. MAIJER .Mathematical Modeling of Multipass Hot Deformation of Aluminum Alloy AA5083-Model Development and Validation[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2007(4):922-935.
[6] Ahmed H;Wells MA;Maijera DM;Howes BJ;van der Winden MR .Modelling of microstructure evolution during hot rolling of AA5083 using an internal state variable approach integrated into an FE model[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):278-290.
[7] Hirsch J.Virtual fabrication of aluminium products:Microstructural modeling in industrial aluminum production[M].Weinheim:Wiley-VCH,2006
[8] 许思广;连家创 .环件轧制中晶粒变化的计算机模拟[J].塑性工程学报,1994,1(02):24.
[9] 崔振山,刘才.热轧过程微观组织演变的数值预报与试验研究[J].机械工程学报,2000(07):92-95.
[10] Wang F;Ning L;Zhu Q et al.An investigation of descaling spray on microstructural evolution in hot rolling[J].Int J Adv Manuf Techn,2008,38(01):38.
[11] Dejan So .Microstructure evolution in deformed and recrystallized electrical steel[D].Philadelphia:Drexel University,2008.
[12] Siamak Serajzadeh .A study on kinetics of static and metadynamic recrystallization during hot rolling[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):146-153.
[13] 余驰斌,叶传龙,赵刚,张云祥,宋平,苏毅,陈良,曾萍.热轧Nb-Ti钢静态再结晶组织演变及模型研究[J].钢铁钒钛,2004(01):25-29.
[14] 余驰斌,鲍思前,叶传龙,赵刚,张志红,张超,胡敏.铌钛微合金热连轧带钢冷却过程中组织演变及模型的研究[J].上海金属,2005(01):21-25.
[15] 耿世奇 .金属热锻过程再结晶与晶粒长大演化的数值模拟[D].南昌航空工业学院,2006.
[16] 王进,陈军,赵震,阮雪榆.F40MnV非调质钢的热变形行为[J].钢铁研究学报,2007(05):68-71,106.
[17] 廖舒纶,张立文,岳重祥,裴继斌,高惠菊,贾元伟,廉晓洁.GCr15钢单道次压缩实验分析及三维模拟[J].材料工程,2008(08):31-34.
[18] 邓文斌,陈慧琴,李臻熙.TC11钛合金盘模锻过程微观组织的数值模拟[J].材料工程,2009(12):30-33.
[19] 何文武,刘建生,郭银芳,陈慧琴,郭会光.Mn18Cr18N护环钢多火次锻造微观组织演变及模拟[J].塑性工程学报,2010(02):45-49.
[20] 金泉林;刘晓飞.铝合金盘件等温辗压过程中晶粒尺寸演化的数值模拟与实验验证[J].航空学报,2011(12):20.
[21] von Neumann J.Theory of self-reproducing automata[M].Urbana:university of Illinois Press,1996
[22] Gardner M .The fantastic combinations of John conways new solitaire game of "life"[J].Scientific American,1970,223(04):120.
[23] Dewdney A K .A cellular universe of debris droplets defects and demons[J].Scientific American,1989,261(02):102.
[24] Wolfram S .Statistical mechanics of cellular automata[J].Reviews of Modern Physics,1983,55(03):601.
[25] Wolfram S .Cellular automata as a models of complexity[J].Nature,1984,311(5985):419.
[26] Raabe D.;Becker RC. .Coupling of a crystal plasticity finite-element model with a probabilistic cellular automaton for simulating primary static recrystallization in aluminium[J].Modelling and simulation in materials science and engineering,2000(4):445-462.
[27] Gottstein G;Marx V;Sebald R .Integral recrystallization modeling[J].J Shanghai Jiaotong University,2000,5(01):49.
[28] R. DING;Z. X. GUO .COUPLED QUANTITATIVE SIMULATION OF MICROSTRUCTURAL EVOLUTION AND PLASTIC FLOW DURING DYNAMIC RECRYSTALLIZATION[J].Acta materialia,2001(16):3163-3175.
[29] Ding R;Guo Z X .Microstructural modeling of dynamic recrystallization using an cellular automaton approach[J].Computational Materials Science,2002,23:209.
[30] 何燕,张立文,牛静,裴继斌.元胞自动机方法对动态再结晶过程的模拟[J].材料热处理学报,2005(04):120-124.
[31] 卢瑜,张立文,邓小虎,裴继斌,王赛,张国梁.纯铜动态再结晶过程的元胞自动机模拟[J].金属学报,2008(03):292-296.
[32] 卢瑜,张立文,邓小虎,裴继斌,王赛,张国梁.纯镍动态再结晶过程的元胞自动机模型[J].塑性工程学报,2008(02):70-75.
[33] 肖宏,柳本润.采用Cellular automaton法模拟动态再结晶过程的研究[J].机械工程学报,2005(02):148-152.
[34] 肖宏,徐玉辰,闫艳红.考虑晶粒变形动态再结晶过程模拟的元胞自动机法[J].中国机械工程,2005(24):2245-2248.
[35] 赵宪明,郭娟,吴迪.晶粒正常长大过程的元胞自动机模拟[J].钢铁研究学报,2009(09):28-32,42.
[36] 易幼平,刘超,黄始全.基于DEFORM-3D的7050铝合金动态再结晶元胞自动机模拟[J].中南大学学报(自然科学版),2010(05):1814-1820.
[37] 支颖,刘相华,喻海良,王振范.微合金钢热变形组织与性能演变的CA模拟[J].金属学报,2011(11):1396-1402.
[38] 黄锋,邸洪双,王广山.薄带双辊铸轧过程凝固组织的数值模拟[J].热加工工艺,2011(05):57-60.
[39] 麻晓飞.动态再结晶过程的元胞自动机模拟[J].热加工工艺,2012(02):99-102.
[40] Evers L P;Brekelmans W A M;Geers M G D .Non-local crystal plasticity model with intrinsic SSD and GND effects[J].Journal of the Mechanics and Physics of Solids,2004,52:2379.
[41] Zhou Y.;Savoie J.;Makinde A.;MacEwen SR.;Jonas JJ. .Effect of texture on earing in FCC metals: Finite element simulations[J].International Journal of Plasticity,1998(1/3):117-138.
[42] Wen XY;Zhai T;Xiao CH;Ningileri S;Li Z;Lee WB;Das S .A dislocation-model of forming limit diagrams of FCC metal sheet with combination of cube and copper orientations[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):149-157.
[43] Bonfoh N.;Lipinski P.;Carmasol A.;Tiem S. .Micromechanical modeling of ductile damage of polycrystalline materials with heterogeneous particles[J].International Journal of Plasticity,2004(1):85-106.
[44] Liu B;Huang Y;Li M;Hwang KC;Liu C .A study of the void size effect based on the Taylor dislocation model[J].International Journal of Plasticity,2005(11):2107-2122.
[45] Potirniche GP;Hearndon JL;Horstemeyer MF;Ling XW .Lattice orientation effects on void growth and coalescence in fcc single crystals[J].International Journal of Plasticity,2006(5):921-942.
[46] 皮华春,韩静涛,章传国,A.K.Tieu,姜正义.面心纯铝单向拉伸的晶体塑性学有限元模拟[J].塑性工程学报,2007(01):1-5.
[47] 杨梅,董湘怀.基于晶体塑性模型的板料成形极限预测[J].上海交通大学学报,2008(05):720-723.
[48] 郭运强,张克实,耿小亮,刘芹.晶体塑性模型在单晶铜低周疲劳行为中的应用[J].机械强度,2009(02):276-281.
[49] 刘文辉,李茂华,伍先明.不均匀变形对空洞长大影响的有限元分析[J].湖南科技大学学报(自然科学版),2010(01):30-33.
[50] 张丰果,董湘怀,章海明,李河宗.微镦粗过程晶体塑性模型研究[J].塑性工程学报,2011(03):5-8,29.
[51] 陈云,崔俊芝,聂玉峰.基于有限变形单晶塑性滑移的微观热-力耦合模型及其有限元计算[J].固体力学学报,2012(01):32-38.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%